aftermarket seats in your Lightning
#1
#4
Find some one that does apulstry in cars and have him cut the passenger seat and the foam along where the stitchng meets with the middle part of the seat. He can use the Alcantara from the middle to finish of the side of the seat. Then you have to get floor mounts from a Expedition or a Crew Cab with capt chairs and use that in place of the bracket in the bench. This will save you money and you still have Lightning seats in you're truck.
#5
#6
Originally Posted by CDB03STX
I would like to loose my column shifter and 60/40, then go with two seats with the center shifter similar to the newer style FX4 F150s. I'm sure it could be done but at what cost..... Would be sweet IMO
My dad had a Chevy pickup with 3 on the Tree, and it was a blast to drive.
#7
Originally Posted by Tim Skelton
I prefer steering wheel shifters. Even though less "sporty," the shifter falls right to hand for the only relevant shift -- F <> R.
My dad had a Chevy pickup with 3 on the Tree, and it was a blast to drive.
My dad had a Chevy pickup with 3 on the Tree, and it was a blast to drive.
Trending Topics
#11
Originally Posted by 1fast4.6
Ive had my eye on those seats for a while. Do you have your sholder harness bolted to the roll cage?