Cervini hood ?
#1
Cervini hood ?
Tried calling Cervini this morning but was on hold for 20 mins. Anyway can anyone tell me does the ram air hood come with the mesh inserts like in the pic on their web sight?
Also any other experience regarding this hood would be nice. One more thing anybody got pics of this hood or other hoods on a silver L?
------------------
2000 Lightning Silver frost
Clear corners (Front only)
JDM 90mm Kit, JDM Chip, Bed Rug, Snuglid
Also any other experience regarding this hood would be nice. One more thing anybody got pics of this hood or other hoods on a silver L?
------------------
2000 Lightning Silver frost
Clear corners (Front only)
JDM 90mm Kit, JDM Chip, Bed Rug, Snuglid
#2
No, they do not come with the mesh you see in the picture. What you have is an open hole in the hood...
Quality and reliability is superb. My local Ford dealer gets shipments directly from Cervini, paints them and then calls customers to bring their F150s in for installation.
Good luck and keep dialing.
2001L_Gato_Rojo
Red 2001 Lighting
100% stock
Built 4/17/01
Delivered 5/9/01
Quality and reliability is superb. My local Ford dealer gets shipments directly from Cervini, paints them and then calls customers to bring their F150s in for installation.
Good luck and keep dialing.
2001L_Gato_Rojo
Red 2001 Lighting
100% stock
Built 4/17/01
Delivered 5/9/01
#4
I also have a few questions for those of you with the Cervini's hood.
1)How long did it take for you to receive the hood?
2)I have seen some of you put a sort of billet (or aluminum) grille in the small openings. How hard is this to do and how do you do it?
3)Is there any danger of debris or water getting in the vents and into the engine compartment?
Thanks for all the help.
1)How long did it take for you to receive the hood?
2)I have seen some of you put a sort of billet (or aluminum) grille in the small openings. How hard is this to do and how do you do it?
3)Is there any danger of debris or water getting in the vents and into the engine compartment?
Thanks for all the help.
#5
I have never had a problem with the COWL taking in any water, even ynder the most severe downpours.
I had my hood in 2 hours, I drove to the factory/warehouse up in NJ.
------------------
Spiro-THE"GREEK"
12.373 @ 110.15@ 4700lb w/out the Go-Go juice
11.94 @ 115.31@ 4700lb with 100 shot Go-Go juice
11.40 @ 113 with 150 shot(on the brakes)NOT BACKED UP 4700 lbs.
Empty Pockets Racing DE-NJ
Sponsored by POWER SURGE PERFORMANCE
Sales@POWERSURGEPERFORMANCE.NET
MONDAYS,TUESDAYS,WEDNESDAYS,THURSDAYS
@ 302-335-3326 10 a.m.ET-6 p.m. ET
I had my hood in 2 hours, I drove to the factory/warehouse up in NJ.
------------------
Spiro-THE"GREEK"
12.373 @ 110.15@ 4700lb w/out the Go-Go juice
11.94 @ 115.31@ 4700lb with 100 shot Go-Go juice
11.40 @ 113 with 150 shot(on the brakes)NOT BACKED UP 4700 lbs.
Empty Pockets Racing DE-NJ
Sponsored by POWER SURGE PERFORMANCE
Sales@POWERSURGEPERFORMANCE.NET
MONDAYS,TUESDAYS,WEDNESDAYS,THURSDAYS
@ 302-335-3326 10 a.m.ET-6 p.m. ET
#6
1) If I remember correctly, it took 3 weeks to arrive. That was from NJ to WA.
2) Go to a junkyard and look for the grill insert in the hood of an 80's Trans-Am (the ones with the offset backward facing scoop) or the engine cover vents on a Fiero. They both use a honeycomb pattern that matches the 99-00 grill. I can't take credit for this find, someone else on one of the forums discovered this one.
3) Yes and Yes.
If Cervini's tells you that they will have a functional ram-air intake kit for the hood in 6-8 weeks, they are BSing you. They've been saying that for at least a year now. I'm just starting to design and build my own because I'm tired of waiting.
------------------
Mark
'00 Lightning
'79+ Corvette
2) Go to a junkyard and look for the grill insert in the hood of an 80's Trans-Am (the ones with the offset backward facing scoop) or the engine cover vents on a Fiero. They both use a honeycomb pattern that matches the 99-00 grill. I can't take credit for this find, someone else on one of the forums discovered this one.
3) Yes and Yes.
If Cervini's tells you that they will have a functional ram-air intake kit for the hood in 6-8 weeks, they are BSing you. They've been saying that for at least a year now. I'm just starting to design and build my own because I'm tired of waiting.
------------------
Mark
'00 Lightning
'79+ Corvette
#7
I got the Ram air hood. Just got my bro-in-law a Ram Air hood. They have the inserts on request. If you don't ask for them, you won't get them. My holes are open. But, I asked for two sets. I'll have them soon. I'll be adding the functional set-up as soon as it's available. As far as water, it doesn't hurt anything. Water can come up from the bottom just as well as the top.
------------------
1997 F-150 XLT 4X4 Off-Road
4.6L Auto.
3.55 Gears
All Power Interior
Tilt Wheel
Cruise Control
Sliding Rear Window
17" Rims W/ Goodyear RT/S P265-70R-17's
Cervini's Ram Air Hood
K&N Gen.
SUPERCHIP
True Dual Flowmasters
4" Chrome Tips
GTS Carbon Fiber Headlight Covers
Ford Motorsport Chrome Rear Cover
Ford Racing Duraliner
Lund Backdraft
35% Tinted Windows
Ultra Bright Headlights & Fog Lights
Pioneer DEH-9300 Head Unit
Pioneer EQ-6520 10-Channel Equalizer
4-Pioneer TS-P682 6x8 2-Way Components Speakers
2-Pioneer TS-A6995 6x9 4-Way Speakers
Pioneer TS-WX65A Amplified 6 1/2" Sub
Pioneer GM-X924 65 Watt 4-Channel Amp
Bel 980 Radar Detector
Viper Alarm
Rancho RSX Shocks Front and Rear
Lumi Logo Front Ford Emblem
Billet 4X4 Third Brake Light Cover
Ford F-Series Floor Mats
Ford Valve Stem Caps
Class III Hitch
Ford Hitch Receiver Cover
Westin Chrome Nerf Bars
---------------------------------
------------------
1997 F-150 XLT 4X4 Off-Road
4.6L Auto.
3.55 Gears
All Power Interior
Tilt Wheel
Cruise Control
Sliding Rear Window
17" Rims W/ Goodyear RT/S P265-70R-17's
Cervini's Ram Air Hood
K&N Gen.
SUPERCHIP
True Dual Flowmasters
4" Chrome Tips
GTS Carbon Fiber Headlight Covers
Ford Motorsport Chrome Rear Cover
Ford Racing Duraliner
Lund Backdraft
35% Tinted Windows
Ultra Bright Headlights & Fog Lights
Pioneer DEH-9300 Head Unit
Pioneer EQ-6520 10-Channel Equalizer
4-Pioneer TS-P682 6x8 2-Way Components Speakers
2-Pioneer TS-A6995 6x9 4-Way Speakers
Pioneer TS-WX65A Amplified 6 1/2" Sub
Pioneer GM-X924 65 Watt 4-Channel Amp
Bel 980 Radar Detector
Viper Alarm
Rancho RSX Shocks Front and Rear
Lumi Logo Front Ford Emblem
Billet 4X4 Third Brake Light Cover
Ford F-Series Floor Mats
Ford Valve Stem Caps
Class III Hitch
Ford Hitch Receiver Cover
Westin Chrome Nerf Bars
---------------------------------
Trending Topics
#8
Hey Mark,
Did they tell you why? I talk to these guys alot. I live 15 minutes from them. I'll tell you what they told me. They had the working ram air set-up done,but didn't like the performance they were getting out of it. So, they went back to the drawing board, redone it. Now the wheather here in Jersey didn't want to co-operate. Inside dyno's are nice, but wanted to hit the local track as well. That's all I know dude. But it is coming. I'm waiting myself. Nice looking truck. Nice hood too.
Did they tell you why? I talk to these guys alot. I live 15 minutes from them. I'll tell you what they told me. They had the working ram air set-up done,but didn't like the performance they were getting out of it. So, they went back to the drawing board, redone it. Now the wheather here in Jersey didn't want to co-operate. Inside dyno's are nice, but wanted to hit the local track as well. That's all I know dude. But it is coming. I'm waiting myself. Nice looking truck. Nice hood too.
#9
New experience with my hood,
Had to drive this weekend in a heavy thunderstorm, and the airbox did get some moisture due to all the rain. But we got seven inches this weekend in CT, and its the first time the filter ever got wet to my knowledge.
With only alittle moisture, the Truck ran fine still.
It was coming down in buckets and I was at highway speeds.
John
NLOC 52
------------------
http://www.f150world.com/e40d/
Had to drive this weekend in a heavy thunderstorm, and the airbox did get some moisture due to all the rain. But we got seven inches this weekend in CT, and its the first time the filter ever got wet to my knowledge.
With only alittle moisture, the Truck ran fine still.
It was coming down in buckets and I was at highway speeds.
John
NLOC 52
------------------
http://www.f150world.com/e40d/
#10
Not too hard to make.
Rich
1999.5 SVT Lightning - Red. 100HP Shot Nitrous(NOS), NGK TR6 Plugs, BellTech 3/4 drop, BellTech Nitroactive shocks, Ford MotorSport Chrome Lightning wheels, JDM Chip. K&N Filter. Viper Alarm w/remote start, Sir Michael's roll pan, smooth corners and steps w/billet inserts, clear corner lenses, Cervinis Ram Air hood, ARE Cover w/ wing, Momo billet pedals, cd changer, cover, Phantom boost and nitrous gauges, MTX Thunderform w/ 2 - 10" JL Audio W-3 subs. 5-channel 500w. Clarion amp., (4)Polk Audio 3-way, 130w. DX 7's, Color-matched Muth signal mirrors, Soundproofed cab, BedRug, Trenz billet grills, Piaa 9007 Super Whites, Bucket Seat Conversion, Carbon fiber dash(photogenesis), etc. Build #2755
TampaSVT@Tampabay.rr.com
http://home.tampabay.rr.com/tampasvt/
2001 Lexus IS-300
2001 EB Expedition
[This message has been edited by TampaSVT (edited 06-18-2001).]
#11
#12
<font face="Verdana, Arial" size="2">Originally posted by whoop72:
Gato Rojo. Who is the local dealer selling the ram hoods?</font>
Gato Rojo. Who is the local dealer selling the ram hoods?</font>
2001L_Gato_Rojo
#15
2001L_Gato_Rojo
Who do you call at Tomball Ford? Is there a resale market for the aluminum hood?
------------------
1993 Lightning,Complete Bassani,FoMoCo mass air conv,K&N,Bilsteins,pheno spacer, roller rockers
1994 Pace Car,full Bassani, K&N, 3.73, pulleys
2001 Lightning, box stock
2001 Saleen S281SC Speedster #613, box stock
Who do you call at Tomball Ford? Is there a resale market for the aluminum hood?
------------------
1993 Lightning,Complete Bassani,FoMoCo mass air conv,K&N,Bilsteins,pheno spacer, roller rockers
1994 Pace Car,full Bassani, K&N, 3.73, pulleys
2001 Lightning, box stock
2001 Saleen S281SC Speedster #613, box stock