You should think before you speak. Your way out of your league....
You dont have a clue what your speaking of and your trying to start a flame war.

All of the Tuners TRY THEIR hardest to make the chips work in EACH application. It is up to the Owner to let the TUNER know what goes on. Here is my way to back up my JL chip. Can you back anything you have posted up??

And Before you ask, I deal with all the TUNERS, Maybe some more than others, But I have talked to the 4 major ones and will deal with ANY of them if needed.

From my Chip post over the 1/26/02 weekend @ the track...
Lariat4X4 had a Ford Diagnostic Scanner that he brought with him. We met up at a Food Lion near the track and had some downtime so he decided to check over my truck some. First he check the temperature banks (as he called them) on the heads. I had just put in a 160 stat earlier in the week. After driving around then parking he found the heads were sitting at 168 DegF. I started it back up and they were staying around 167 at idle. He then checked my O2 Sensor readings and my fuel tables. Everything he checked was well within the parameters that are shown or tought to him as a Ford Mechanic. This made me very happy to know the truck was tuned well and would safely be able to run!! True the boost could have gave me issues as we all know, but CHIP wise I was well taken care of. The truck was slightly rich by what he saw on the scanner. RICHER IS BETTER!!! LEANER IS MEANER!!! Remeber that.

This shows my JL TUNED Diablosport Chip was doing what it was suppose to do!!!!

 

Oh, dear....

I don't think I wanna watch this one.

 

Yeah I guess I should have looked at this first. It would have made it all become clear....

https://www.f150online.com/forums/me...o&userid=14154

 

I think it's more of a 01 and up thing. The mods especially a big pulley seems to throw 'em over the edge. We'll just have to wait an see.

 

 

 

Speedin,

Thats funny man. LOL

 

dammit Richard, hobble to your neutral corner... or something....

 

LOL, U made my day....