Tire Width
#1
#2
I would say a 335. BaBolt widened his stock wheels and runs 335's on them. The stockers are 18x9.5 and I think he only widened them 1/2", so there is your 10" wheel.
http://www.weldcraft.net <<<They did the widening. Not to far from you either
--Joe
http://www.weldcraft.net <<<They did the widening. Not to far from you either
--Joe
#3
Thanks for the info Soap.
I see that your just across the river from me. I hope there will be some Lightning events happening this summer in this general area. It would be nice to meet up with all of you. Seems to be alot of L owners on this forum from the Detroit and surrounding areas.
Cya
Dave
I see that your just across the river from me. I hope there will be some Lightning events happening this summer in this general area. It would be nice to meet up with all of you. Seems to be alot of L owners on this forum from the Detroit and surrounding areas.
Cya
Dave
#6
Not sure about the brand but yes he used 335/30/18's on the stock widened wheels. I am pretty sure he widened all 4.
Email him...... mphillips@mediaone.net
--Joe
Email him...... mphillips@mediaone.net
--Joe
#7
Here is what I did when I widened my wheels. They are 7/8 inch wider then stock. I have done them as wide as an additional 2 inches but I do not like it. As for tires I use the Goodyear Supercar F1's. They are 315x18x40 and I use the stock F1's on the front. Sad to say I cannot use a 35 series aspect ration on the rotten roads in Michigan. Our roads have been Englerized.
Last edited by BABolt; 02-17-2002 at 07:56 PM.