Ok, I am needing a little help here with my guages selection. I am of course going with the Phantom series 2 1/16", but need some help about what additional parts I may need.

There are two different Fuel pressure guages, #5709 & #5763, but don't know which one everyone gets. Is there any difference in the price? Is one more complex than the other? Will I also need a fuel rail adapter? I see a part #3280 for a 1/16"NPTF Male to a 1/8"NPT Female in there catalog. Do I need that?

And for the Air/Fuel Part #5775, what will I need in addition? I see a Oxygen Sensor kit Part #2244 in there catalog. Will that be needed?

Sorry for all of the questions. Any advice will greatly be appreciated.

 

J.D.,
I have the 5709 and wish I would have bought the 5763. The 5763 is the full sweep gauge.. i think it would be easier to keep an eye on.....The 5764 would be nice with the hi-lo memory. Sorry, I can't help on the air-fuel gauge.
Graeme

 

Yes you need the #3280 adaptor for the fuel rail, and No you do not need the Oxygen Sensor Kit for the A/F gauge.

--Joe

 

Soap is right, you do not NEED the O2 sensor kit, but you do WANT it. Tapping into the factory wires is bad news man.

Just run your own sensor and avoid the hassles.

Later,

 

Thanks for the help guys.