I got two more 165 W'ers on last night. Wow there hot!!! The first pic is the bracket my dad and I made, the second is all four on the truck, and the third is about 10 o'clock at night @ about 75 yards away!!! What do ya think? I figure if we can get Mudder, CCLA, and the rest of the KC crew together we could cook some tasty chicken.



------------------

• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]

My 2000 F-150

If it looks good
you'll see it
If it sounds good
you'll hear it
If it's marketed right
you'll buy it
But..if it's real
you'll feel it

[This message has been edited by Spargo2 (edited 07-13-2000).]

[This message has been edited by Spargo2 (edited 07-13-2000).]

[This message has been edited by Spargo2 (edited 07-13-2000).]

 

Looking good! Someday for me perhaps...

But anyhow, it looks great!

------------------
2000 F-150 XLT, Reg Cab/Long Box, Styleside, Oxford White, Dark Graphite Int., 4x4, 4.6L, 3.55 L/S, Off-Road pkg (Skid Plates, Cab Steps, Heavy Duty Shock Absorbers, LT265/70R17SL), Class III Towing pkg with Heavy Duty Cooling pkg, 4 wheel disk ABS, Overhead Console, Factory In-Dash CD, Remote Keyless Entry, and Sliding Rear Window, K&N FIPK (removed), Cabin Air Filtration, Ventvisors, Ford Bug Deflector, Ford Bedliner, SuperChip (removed).

2000 Polaris Sportsman 500, Camo Green, 4x4, 499cc 4-stroke, independent suspension, shaft drive, 4 wheel disc brakes, etc.

 

Nice setup! I really like the custom light bar! Looks great, All toes up for you

 

I simply wanted to know if you're still running your stock battery and alternator? I want to run two 165W KC Daylighters but stick with my stock items - possible?

Thanks!


------------------
2000 F150 V6 4.2L 5spd 3.55 gears > SuperChip EGJ3 > FlowMaster Exhaust
> KenWood 600W Powering 2 10" MTX 6000s in ThunderForm Stealth Box > KenWood DPX600 DoubleDin CD/Cassette > CB/PA System > Matrix HID Headlights and FogLights > Bug Deflector > Clear Coroners > Window Vents and Tint > Nothing but Texaco PremiumGasoline-CleanSystem3 > SideMarker Turning signals > Indiglo Gauges > Black TailLight Covers > 55w Reverse Rectangle Lights > Strobe lights in headlamps / Turning Lamps / and TailLamps > AirAid (finally)

In the Future:
> 4" suspension lift and 2" body lift
> 33x12.5x16.5 BFGoodrich AT > 4.56 Gears

 

F150Y2K, no I didn't upgrade any thing other than the relay for the lights. The stock alternator and battery should be fine. Hell Mudders running 8 165w and 2 55w with stock stuff. You be just fine with 2 Daylighters and the stock power.

------------------

• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]

My 2000 F-150

If it looks good
you'll see it
If it sounds good
you'll hear it
If it's marketed right
you'll buy it
But..if it's real
you'll feel it

 

That looks really good buddy. I think we need to start a light club now I really like it, it makes me happy to see that you made the right choice with KC, the number one choice in off-road lighting.





------------------

Patrick aka Mudder or MR.Daylighter of Arlington Texas (D/FW), member of the Texas Chapter club DAYLIGHTER edition F150 ®, Black 98 S/S S/C F150 4x4 0RP 5.4 V8 3.55ls, Ramsey Pro 8000 hidden winch, Grizzly roll bar, Superwhite Bulbs, 2 Baja back up lights, 2 KC 57 Series 5x7 100 watt long range lights, 8 165 watt KC Daylighters, 4 chrome, 4 black ( with 10 KC's, I come alive at night), Manik grill guard, Westin step bars, Rhino Taillight guards (thanks Pony), Magnum bug shield, Sonic aluminum treadplate 36" tool box, Flowmaster 40 series dual exhaust, Airaid High Flow system, Edelbrock IAS shocks, 285/75/16 BFG AT/S KO, American Racing Baja wheels, personalized plates, Cobra CB radio with 3' whip antenna, Escort Laser/Radar detector, Nokia cell phone, a Mobil Speed Pass on the back window, a F150 Online sticker, and a DAYLIGHTER sticker on the front windshield, and yes, I also have been infected with the infamous door crack. More to come for the Daylighter: JBA headers, superchip, 4 more Daylighters, and a Lighted Ford tailgate logo. If you would like to see pics, email me at mudder46@hotmail.com or see pics at me and pony's website www.angelfire.com/ok3/ponysix8 , and to hear the Flowmaster exhaust http://www.angelfire.com/ok3/ponysix8/images/T005.wav
Also the Moderator of the Ford Trucks vs. GM trucks forum over on fordvschevy.com so check it out.
Check out the Toughest SOB in the WWF crush the Rock's Lincoln: http://www.amta.net/files/sc-2.avi
OH HELL YEAH!

2 BRT 4U "Go ahead, flash your brights at me, see what will happen."

Got light?




[This message has been edited by mudder (edited 07-16-2000).]

 

Yea Mudder, How about Club Daylighter, The KC Crew, The Don't Flash You Lights At Me Or I'm Gonna Blind Your *** Org.. Now I'm designing some trick little brackets for the 5X7's. It's just finding time to build them. It took me 2 weeks to find the time to bend the bar.






------------------

• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]

My 2000 F-150

If it looks good
you'll see it
If it sounds good
you'll hear it
If it's marketed right
you'll buy it
But..if it's real
you'll feel it



[This message has been edited by Spargo2 (edited 07-16-2000).]

 

Hey guys dont count me out either! I have 5 KC's accross my brush guard now. Mudder, I might steal BLND U for my license plate from you if you dont mind.

Spargo, love how you made the bar, I like how they go up....LOOKS great

 

Well I don't know if I should say or not but my brothers truck is for sell so we are pullin the front bumper and winch off the front along with all the chrome pieces, which include 6 Daylighters.....guess where those are goin? Yeah, now I can save a few dollars for other items....Now I gotta start thinkin about more mountin brackets. Tonight I'll get some pics of the other lights.....or should I say my new lights

Chris, that is fine with me, it's your truck.

Spargo, you ever thought about havin a sticker made for the winshield? I'm thinkin about gettin a new one made. Maybe " The Bright One", or maybe somethin like "The KC Crew" or somethin of that effect. I think that light club idea would be cool, just a few of us in it until it maybe one day catches on. Chris, Spargo, CCLA, Dave in Waco, Big ED, wanna do it, or is it dumb?

 

Patrick sounds good to me, lets all pitch in on some ideas. Well if I hadnt tried to take out a tree tonight with the right side of my truck id would have liked to buy the winch, but gotta fix my baby!

 

Yea Patrick, I'm still trying to think of a good slogan for a sticker and something for the personal plate, any ideas? What do you think, a Light bar or a Roll bar? I can't make up my mind,but it's getting 4 more. One of the two is definatly next. Mounting brackets are no problem for me, I'll rig something up.

------------------

• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]

My 2000 F-150

If it looks good
you'll see it
If it sounds good
you'll hear it
If it's marketed right
you'll buy it
But..if it's real
you'll feel it

 

Spargo2,

Sounds good, I think you should go with a roll bar. After lookin at my roll bar today and thinkin about where to stick the other lights, me and my father decided to double stack them on the roll bar. Four on four, I think it will look pretty tough. Just got a figure out a good plan, which shouldn't be a problem. Later.

 

Yea,I think I'm going with the roll bar and start off with four KC's. After I get that done I'm gonna get my plates. WA2BRT (way to bright) Whatcha think?

------------------

• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]

My 2000 F-150

If it looks good
you'll see it
If it sounds good
you'll hear it
If it's marketed right
you'll buy it
But..if it's real
you'll feel it

 

Sounds like a good plan to me bud.

 

Spargo2,

Ok, no problem, I'll get the pics up later this evening.

Firezap,

Yep, we are thinkin about another battery, maybe hide one in my tool box or somethin like that, but not sure.

JDm,

I have also thought of that, but right now I just wanna work on gettin the new 4 mounted, then I'll think of new way. The roll bar cost me $285 and I got it from Performance Products, ordered out of their catalog.