Painted headlights
#497
It worked on mine! I did it to my grill, then the winter bullitts for my Mustang and even my sister's Lancer winter wheels. Made them look great. It has definitely held up and I do alot of highway driving. I put about 4 coats of clear (step 2) over it.
#498
#499
Redeye
#502
#504
Its easy.
Pop hood
On the top of the light you will see one bolt. I believe its 8mm but could be a 10mm.
On the inside edge close to the radiator is a rubber strip held on by plastic philips screws. Remove the strip and you will see the last 2 bolts to remove the light.
Pull the light straight out. There are snap clips holding it in.
Pop hood
On the top of the light you will see one bolt. I believe its 8mm but could be a 10mm.
On the inside edge close to the radiator is a rubber strip held on by plastic philips screws. Remove the strip and you will see the last 2 bolts to remove the light.
Pull the light straight out. There are snap clips holding it in.
#506
Three bolts, on in the top on the fender.
two on the inside of the light, have to remove the rubber flap with a four way screw driver.
its easy.
has two pins in the housing.
#508