Patman03 box revisited
#16
Well no progress on the box right now but heres the latest on my truck
Hopefully i can get the box going again now that i have a little extra money. but who knows.....
i was vaccuuming out my truck last night, and was fixing the front corner of the carpet when i discovered water underneath the carpet, so i got to re-gut my interior. I put the drivers and two back seats back in so i can monitor my leak. I did some RTV around some of the rubber seals in the floor pan to try to get them to seal a little better. One of them looked like it took a serious blow from underneath the truck b.c the floor was pushed up a little bit around the seal.
Time to order some Edead when i get some money, but for now the carpet is staying out.
I should be getting my "new" console this week
Hopefully i can get the box going again now that i have a little extra money. but who knows.....
i was vaccuuming out my truck last night, and was fixing the front corner of the carpet when i discovered water underneath the carpet, so i got to re-gut my interior. I put the drivers and two back seats back in so i can monitor my leak. I did some RTV around some of the rubber seals in the floor pan to try to get them to seal a little better. One of them looked like it took a serious blow from underneath the truck b.c the floor was pushed up a little bit around the seal.
Time to order some Edead when i get some money, but for now the carpet is staying out.
I should be getting my "new" console this week
#17
Well i finally put my carpet back in, still need to order some Edead, but who knows when that will be.
The console i was hoping to get fell through so no go there
Ive been kitty hair-ing yesterday and today and have some pictures to show off
It was interesting b.c its so much different application method then the fiber mat and resin was. this is more of a thick paste you have to quickly spread out and flatten out.
It cures very fast and gets hard in a matter of 5 minutes.
The console i was hoping to get fell through so no go there
Ive been kitty hair-ing yesterday and today and have some pictures to show off
It was interesting b.c its so much different application method then the fiber mat and resin was. this is more of a thick paste you have to quickly spread out and flatten out.
It cures very fast and gets hard in a matter of 5 minutes.
Last edited by Patman; 05-29-2008 at 11:43 PM.
#18
#19
#23
#24
#25