Going lower build
#184
#190
I had actually brought cherry pepsi to get that photo but one of the kids helping work on 01f1502wd's truck brought that.
Sadly i had been planning to do this all week...
Sadly i had been planning to do this all week...
Last edited by 06yz250f; 11-04-2011 at 12:07 AM.
#192
Well here's my latest issue, with 3 people in the truck, launching moderately from a stop, got an audible pop from the driveline, back of transmission area.
Found this today, small rubbing of the driveshaft on the bottom of the cab.
So i made some more room for the driveshaft, with my air hammer, then painted to seal it back up from rusting.
Also went ahead and flipped my shock to the forward position on the rear passenger side to hopefully better control my wet pavement wheel hop issues.
Found this today, small rubbing of the driveshaft on the bottom of the cab.
So i made some more room for the driveshaft, with my air hammer, then painted to seal it back up from rusting.
Also went ahead and flipped my shock to the forward position on the rear passenger side to hopefully better control my wet pavement wheel hop issues.
#193
And to keep the thread up to speed, now its
Front:
2" Hotchkis coils
2" DJM LCAs (actually drop 3")
DJM upper control arms for corrected BJ angle
Belltech Street Series shocks for 4" drop
Rear
3" Eibach hanger
2" GF shackles
'99 Lightning leafs
Belltech street series shocks for 6" drop
and even more notches