Slam air
#2
Is there anything in particular you are wondering about or looking for? I don't have specific pics of them installed on the truck mentioned, but I did find this thread:
https://www.f150online.com/forums/su...er-bags-2.html
It would be similar to the setup pictured but they are running a universal kit apparently. You may be able to PM the guy who mentioned he had them on his Screw.
Let me know if there is anything I can do to help. Also, not sure if you have looked it over, but here is a link to the manual.
https://www.f150online.com/forums/su...er-bags-2.html
It would be similar to the setup pictured but they are running a universal kit apparently. You may be able to PM the guy who mentioned he had them on his Screw.
Let me know if there is anything I can do to help. Also, not sure if you have looked it over, but here is a link to the manual.
#7
Trending Topics
#9
#12
When installing a compressor for the 59210 helper springs is a separate supply tank necessary if I'm only using to raise the level to maintain ride height after installing the flip kit, which dropped the rear below the front? If you did install the tank were you able to find a location without placing it inside the bed?
Or, did you install a tank with a remote input for air and not use a compressor?
Or, did you install a tank with a remote input for air and not use a compressor?
Last edited by Blue_Blood; 09-24-2012 at 10:31 PM.
#13
When installing a compressor for the 59210 helper springs is a separate supply tank necessary if I'm only using to raise the level to maintain ride height after installing the flip kit, which dropped the rear below the front? If you did install the tank were you able to find a location without placing it inside the bed?
Or, did you install a tank with a remote input for air and not use a compressor?
Or, did you install a tank with a remote input for air and not use a compressor?
#15