Supercharging a 2003 F-150 Boss
#31
Looks like you'll still need the:
- Fan shroud
- water pump or fan spacer
- throttle cable
- injectors
- maf/boots/air cleaner
- 255 fuel pump
- modified NA wire harness
- L alternator and bracket
- Brackets for IC heat exchanger (or make some)
- 4 IC water hoses
- new heater hose (old one went to front of water, new ones goes to rear)
- new front radiator hose (could use old one)
- EGR line from manifold to blower
Just to name a few parts
- Fan shroud
- water pump or fan spacer
- throttle cable
- injectors
- maf/boots/air cleaner
- 255 fuel pump
- modified NA wire harness
- L alternator and bracket
- Brackets for IC heat exchanger (or make some)
- 4 IC water hoses
- new heater hose (old one went to front of water, new ones goes to rear)
- new front radiator hose (could use old one)
- EGR line from manifold to blower
Just to name a few parts
#32
Looks like you'll still need the:
- Fan shroud Got that too but I would go Navi Water pump and use an E fan
- water pump or fan spacer Got that too but I would go Navi Water pump and use an E fan
- throttle cable
- injectors Go new
- maf/boots/air cleaner Go after market
- 255 fuel pump Got that too for $100 more for a new one
- modified NA wire harness Just use the stock harness
- L alternator Got that too and bracket I have an Alt but no bracket
- Brackets for IC heat exchanger (or make some) Included
- 4 IC water hoses Should be in picture
- new heater hose (old one went to front of water, new ones goes to rear)
- new front radiator hose (could use old one)
- EGR line from manifold to blower Most ditch the egr- I have a billet block off plate
Just to name a few parts
- Fan shroud Got that too but I would go Navi Water pump and use an E fan
- water pump or fan spacer Got that too but I would go Navi Water pump and use an E fan
- throttle cable
- injectors Go new
- maf/boots/air cleaner Go after market
- 255 fuel pump Got that too for $100 more for a new one
- modified NA wire harness Just use the stock harness
- L alternator Got that too and bracket I have an Alt but no bracket
- Brackets for IC heat exchanger (or make some) Included
- 4 IC water hoses Should be in picture
- new heater hose (old one went to front of water, new ones goes to rear)
- new front radiator hose (could use old one)
- EGR line from manifold to blower Most ditch the egr- I have a billet block off plate
Just to name a few parts
#33
#35