FABTECH OWNERS
#1
FABTECH OWNERS
Everyone always talks about how good this lift is. I went to the website and did all this other research on it but the one thing I have never found out is the price. How much does the 2 or 3 inch lift cost and about how much was installation?
Thanks for the help.
------------------
'97 XLT Clearcoat Red 4x2
17 inch Wheels,Stepside, K&N,bedliner, 32 inch tires, flowmasters, deep tint, big Ford oval on back window, 5 spd, platinum plugs, CB, hidden hitch, ford emblem hitch cover and a little wal-mart smiley face on the antenna wearing a coboy hat :-)
http://www.my-f150.com/waldo0506
Thanks for the help.
------------------
'97 XLT Clearcoat Red 4x2
17 inch Wheels,Stepside, K&N,bedliner, 32 inch tires, flowmasters, deep tint, big Ford oval on back window, 5 spd, platinum plugs, CB, hidden hitch, ford emblem hitch cover and a little wal-mart smiley face on the antenna wearing a coboy hat :-)
http://www.my-f150.com/waldo0506
#2
My spindles were about $500.00 and after installation and shocks and blocks and alignment, it was about $1000.00
------------------
2000 F150 XLT 4.6L V8 Auto, SuperCab, Torreador Red Metallic, Magnaflow Cat-Back Exhaust, K&N Drop-in, 265/75/R16 Futura Mud Terrains, Ford Bedliner, Tinted Windows, Steel Horse Billet Grill, Fabtech 3.5" Spindles, 2" rear blocks, Fabtech Performance Shocks
www.geocities.com/y2kf150
------------------
2000 F150 XLT 4.6L V8 Auto, SuperCab, Torreador Red Metallic, Magnaflow Cat-Back Exhaust, K&N Drop-in, 265/75/R16 Futura Mud Terrains, Ford Bedliner, Tinted Windows, Steel Horse Billet Grill, Fabtech 3.5" Spindles, 2" rear blocks, Fabtech Performance Shocks
www.geocities.com/y2kf150
#3
Thanks a million! I will start saving.
------------------
'97 XLT Clearcoat Red 4x2
17 inch Wheels,Stepside, K&N,bedliner, 32 inch tires, flowmasters, deep tint, big Ford oval on back window, 5 spd, platinum plugs, CB, hidden hitch, ford emblem hitch cover and a little wal-mart smiley face on the antenna wearing a coboy hat :-)
http://www.my-f150.com/waldo0506
------------------
'97 XLT Clearcoat Red 4x2
17 inch Wheels,Stepside, K&N,bedliner, 32 inch tires, flowmasters, deep tint, big Ford oval on back window, 5 spd, platinum plugs, CB, hidden hitch, ford emblem hitch cover and a little wal-mart smiley face on the antenna wearing a coboy hat :-)
http://www.my-f150.com/waldo0506
#4
Waldo0506,
Guy.....if you save up alittle more you can get a 6.5"-7" lift for $500 bucks more installed. That includes spindle, spings, upper control arm, shocks and a block for the rear. But if you're only lookin for a small lift for a cheaper price go with a body lift. If you do the larger lift(6.5") then you might want to get larger rims and tires to fill in the gap between the tire and fender.....which also leads to needin more cash, but it'll look so saweet. Lates.
Guy.....if you save up alittle more you can get a 6.5"-7" lift for $500 bucks more installed. That includes spindle, spings, upper control arm, shocks and a block for the rear. But if you're only lookin for a small lift for a cheaper price go with a body lift. If you do the larger lift(6.5") then you might want to get larger rims and tires to fill in the gap between the tire and fender.....which also leads to needin more cash, but it'll look so saweet. Lates.
#5
Hey Waldo0506, I am also looking at a Fabtech lift for my truck. I just today called around for prices. TruckPerformance.com price was $655 TOTAL!! There is no charge for shipping and of course no tax. 4 Wheel Parts was $620 which included shocks and shipping, but the guy there had no idea what he was talking about. He must have been new so I don't know if that price will fly with his supervisor. National Tire wanted $693 without the shocks. You should get yourself a 4x4 magazine and start calling, then take those prices to your local store to see if they wil match it. Gook luck in your quest, I know what you are going through. Bluefish97
------------------
'97 F150 XLT SC 4X2 4.6L Moonlight Blue Century Cap 265/75/16 Firestone Wilderness A/T
------------------
'97 F150 XLT SC 4X2 4.6L Moonlight Blue Century Cap 265/75/16 Firestone Wilderness A/T
#6
I am definitely gonna look around. I am not going over 3.5 and NO body lift, I would have to adjust my pipes and my hidden hitch would become unhidden because I would have to raise the bumpers. I am going to put 35's under it after that. I wont get it till summer though because first i gotta get Office 2000 and that is gonna kick me in the ****. Unless someone would happen to have a spare copy lying around.
------------------
'97 XLT Clearcoat Red 4x2
17 inch Wheels,Stepside, K&N,bedliner, 32 inch tires, flowmasters, deep tint, big Ford oval on back window, 5 spd, platinum plugs, CB, hidden hitch, ford emblem hitch cover and a little wal-mart smiley face on the antenna wearing a coboy hat :-)
http://www.my-f150.com/waldo0506
------------------
'97 XLT Clearcoat Red 4x2
17 inch Wheels,Stepside, K&N,bedliner, 32 inch tires, flowmasters, deep tint, big Ford oval on back window, 5 spd, platinum plugs, CB, hidden hitch, ford emblem hitch cover and a little wal-mart smiley face on the antenna wearing a coboy hat :-)
http://www.my-f150.com/waldo0506
#7
I just purchased a 7.5 long travel lift from Fabtech for $2700.Tires/wheels for $1750.Fiberglas fenders for $450.Rancho steering stabilizer-$85,4.56 gears-$220,Auburn performance limited slip for 9.75 rearend-$515.Installation for everything cost a little over $2000.My truck should be done on Friday.
Trending Topics
#8
#11
I always thought that Fabtechs products were high quality but now I'm having second thoughts. Now before I explain let me first say that I have never used Fabtech products so this is just hear say.
Talked to a guy today w/ a newer F150 2WD w/ a 6.5 in Fabtech lift and a 3in body lift. Came over today to the shop that does my work, asking for Fabtechs tech support number. Apparently he is having some major problems w/ the lift and its been going on for some time now. Heard the same thing from another guy last week.
He didn't say specifically what is wrong but if I see him again I'll be sure to ask.
------------------
2000z71 7-8in Superlift 3/4 ton torsion bars, 3in PA body lift, CST rear dual shock kit w/ Rancho 9000s, 35in BF Muds and tons of other cool mods!
www.geocities.com/y2kboti
IN MEMORY OF DALE EARNHARDT
[This message has been edited by y2kboti (edited 03-02-2001).]
Talked to a guy today w/ a newer F150 2WD w/ a 6.5 in Fabtech lift and a 3in body lift. Came over today to the shop that does my work, asking for Fabtechs tech support number. Apparently he is having some major problems w/ the lift and its been going on for some time now. Heard the same thing from another guy last week.
He didn't say specifically what is wrong but if I see him again I'll be sure to ask.
------------------
2000z71 7-8in Superlift 3/4 ton torsion bars, 3in PA body lift, CST rear dual shock kit w/ Rancho 9000s, 35in BF Muds and tons of other cool mods!
www.geocities.com/y2kboti
IN MEMORY OF DALE EARNHARDT
[This message has been edited by y2kboti (edited 03-02-2001).]
#12
Waldo: I too was looking at the same lift
(Fabtech 3 1/2) and truckperformance.com has the best prices I have found yet, and yes
shipping is free till the end of the month.
Office 2000, email me and I will see if I can help your cause! "murray@courteouscom.com"
------------------
My Ride:
2000 Flareside EC/SB 4.6 4X2 (Harvest Gold)
Air Raid FIPK/w K&N filter
Gibson Split back duals/w tips
Power Aid throttle body spacer
Westin nerf bars (Black)
Lund vent shades, bug shield
V-Tech tail light covers (painted to match)
Tinted Windows
Factory street flares (painted to match)
(added and chg'd mudflaps)
Factory grill w/honeycomb insert
(swapped out plain chrome one)
Tow Package (III)
Future Mods:
Fabtech 3 1/2 lift with
Eagle 589's/tires to match
View my Ride: http://www.f150world.com/trippn/
(Fabtech 3 1/2) and truckperformance.com has the best prices I have found yet, and yes
shipping is free till the end of the month.
Office 2000, email me and I will see if I can help your cause! "murray@courteouscom.com"
------------------
My Ride:
2000 Flareside EC/SB 4.6 4X2 (Harvest Gold)
Air Raid FIPK/w K&N filter
Gibson Split back duals/w tips
Power Aid throttle body spacer
Westin nerf bars (Black)
Lund vent shades, bug shield
V-Tech tail light covers (painted to match)
Tinted Windows
Factory street flares (painted to match)
(added and chg'd mudflaps)
Factory grill w/honeycomb insert
(swapped out plain chrome one)
Tow Package (III)
Future Mods:
Fabtech 3 1/2 lift with
Eagle 589's/tires to match
View my Ride: http://www.f150world.com/trippn/
#13
Fabtech has no support after you buy it thats it they are unwilling to resolve any problem you encounter.If you are looking for quailty lift parts at prices better than Fabtech follow this link -
http://www.truckn.com
http://www.truckn.com
#14
dedodd, did you purchase anything from the place that you mentioned?? It says that they are $299 a pair! Do you have to buy 2 pairs? If so, that's still a pretty good price.
------------------
-------------------------
1999 super cab
white with tan bottom
4x2 automatic
4.6L v8
BFG AT TA KO 265/75
WAAG grillguard
2 KC daylighters
vampire remote start combo alarm
steelhorse nerf bars
Husky chrome toolbox
4 pioneer 3 way 6x8's
-------------------------------------------------------------------------------------
wants: 2 chamber flowmaster dual exhaust
tan fender flares
american racing atlas
2" fabtech suspension leveling kit
[This message has been edited by truckluver (edited 04-01-2001).]
[This message has been edited by truckluver (edited 04-01-2001).]
------------------
-------------------------
1999 super cab
white with tan bottom
4x2 automatic
4.6L v8
BFG AT TA KO 265/75
WAAG grillguard
2 KC daylighters
vampire remote start combo alarm
steelhorse nerf bars
Husky chrome toolbox
4 pioneer 3 way 6x8's
-------------------------------------------------------------------------------------
wants: 2 chamber flowmaster dual exhaust
tan fender flares
american racing atlas
2" fabtech suspension leveling kit
[This message has been edited by truckluver (edited 04-01-2001).]
[This message has been edited by truckluver (edited 04-01-2001).]
#15
ok, i have a question for waldo0506 and 2001 F150. first, waldo are you sure the 35's are going to fit with just the 3in lift? my 305/70/16 rubbed with just the 3 inch lift. and for 2001F150, just curious why you choose a 16x8 instead of a 16x10 for that wide of a tire?
***JasoN***
------------------
Oxford White 1998 F-150 STX, reg. cab, flareside, 4.2, auto, 3.55s, tint, Prestige alarm, Bel radar detector, Pioneer CD player, 4 Polk 5x7's, Stull billet grille and bumper insert, Flowmaster exhaust, K&N airfilter, V-Tech Tailight Covers(painted to match truck), removed factory mud flaps, Clear Corner Lenses, DJM shackles(removed for lift), Billet Oval Mirror, 3in. Body Lift, lift lips, chrome tow hooks, Pilot driving lights mounted behind billet bumper insert, 16x8 Ultra Wheels, 305/70/16 Goodyear AT/S, Custom door ding from some a$$hole, Fabtech Spindle Lift, 2in. blocks out back FUTURE MODS: rancho rsx shocks, 1 1/2in. coil spacers, 2in. add-a-leafs, 315/75-16 yokohama geolander mt's, and still working on getting that dang door ding fixed . . . FIGHTIN TEXAS AGGIE C/O '03
***JasoN***
------------------
Oxford White 1998 F-150 STX, reg. cab, flareside, 4.2, auto, 3.55s, tint, Prestige alarm, Bel radar detector, Pioneer CD player, 4 Polk 5x7's, Stull billet grille and bumper insert, Flowmaster exhaust, K&N airfilter, V-Tech Tailight Covers(painted to match truck), removed factory mud flaps, Clear Corner Lenses, DJM shackles(removed for lift), Billet Oval Mirror, 3in. Body Lift, lift lips, chrome tow hooks, Pilot driving lights mounted behind billet bumper insert, 16x8 Ultra Wheels, 305/70/16 Goodyear AT/S, Custom door ding from some a$$hole, Fabtech Spindle Lift, 2in. blocks out back FUTURE MODS: rancho rsx shocks, 1 1/2in. coil spacers, 2in. add-a-leafs, 315/75-16 yokohama geolander mt's, and still working on getting that dang door ding fixed . . . FIGHTIN TEXAS AGGIE C/O '03