those really don't look like 37" tires. More like 35's. I can't get my truck to fit 35" tires with a 6 inch lift without shaving and trimming my bumper.. is it a 4x4? that would give the truck an extra two inch lift or so...

------------------
Erica
2001 F150 xlt supercab, soon-to-be lifted six inches on suspension, three on body and 35" TSL tires. Mod's on everything so far.

 

Ilmagill- here is the only pic i have right now. It isn't that great and the pic is from the front so you cant really see how the bumpers were trimmed. After cutting 2" of the bottom corners the tires fit fine. This is a 1992, they didn't make the wheel wells any smaller on the new trucks did they? I will try to get a new picture of the side of the truck.






[This message has been edited by Ford4ever (edited 06-19-2001).]

 

Yep those are definetely 37s, cause those rims are 17"...i think they fit in there because of the width. I'm sure i could get 36s maybe 37s under mine, but any extra width doesnt allow it. So my thinking is that it fits due to the 12.5" width. Although, i agree its still a tight squeeze...probably some trimming goin on in there...


------------------
-Brandon Warford
97 F150 4x4 Sport Brt. Red SuperCab
4.6l Triton V8
3.55LS Rear-end
MECHANICAL MODS:
Custom Alum. Skidplate
3" Performance Acc. Body Lift & lift lips
1-1.5" torsion bar
Fabtech 4" Blocks to replace stock
Clear Corner Lenses
315/75R16 Yoko. Geolander MTs
American Racing Atlas 16x10
True Dual Exhaust
--(2) 3 Chamber Flowmasters (Exits like the Lightning)
FUN MODS:
Pioneer 8000 3D series
Boston Acoustic 5x7s
Sony Xplode 4ch Amp
(2) 8" RF XLC Subs
Custom 4x4 Sticker
Viper Alarm
FUTURE MODS:
4.56 gears
Repaint around Headlights where clearcoat is coming off >=(
Fix ding in tailgate
New pinstripe
Heckethorn or Rancho Steering Stabilizer
Rancho RS9000 Shocks & Control System
Thats about it for now!
Check out my NEW WEBSITE:
****BigBadRed's Website****
Killintime4fun@aol.com
"F-150: The other woman!"

"...the road curves to the right and there are a lot of signs that say you cannot turn left...TURN LEFT."

 

I'm not sure what to think of that truck, not sure I like it. Guess I'm against ya sprhck, I don't like the winch mount.

------------------
98 Black F150 S/C 4x4 ORP 5.4

4" Rancho lift, 14 KC lights, lots of other goodies. Check out www.F150World.com/Mudder for pics and all the info.

 

Ford4ever-

You got 35's on with just a 4 inch lift? Ya got anypics...I have 4.5inches and it doesn't look like i could get 35's in there?

------------------

• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]
• [*]

Things to come:4.10 gears, Grill
ilmagill@aol.com For Pictures :
www.geocities.com/ilmagill

 

not sure if you guys knew, but last I checked that F-150 was for sale. A buddy of mine runs the fly-n-hi website (www.fly-n-hi.com) who built/owns the truck.

------------------

Matt Adams
Littleton, CO
1994 Ford Explorer, highly modified ( http://mattadams.f150online.net )
2000 F-150 XLT Supercab
5.4L Triton V8 Engine, Automatic Transmission, 3" dual exhaust, Rhino lining, K&N Filtercharger Intake Performance Kit (FIPK), JL Audio stealthbox with Phoenix gold amplifier, premium stereo
Genuine Steel brush guard with 4 PIAA 520's mounted on it, PIAA Airdam with PIAA 520 fog's and PIAA 510 superwhite driving lights in it.
off-road and tow packages
and much much more!
Grizzly Roll bar (double bar/single bar) with 5 PIAA 80 XT's mounted on it (3 driving, 2 fogs)
Storage box in the back
Soon to come:
Pistol mod (convenient, easily accessible yet somewhat hidden access).
Custom paint job?

 

I got the coil spacers from 4wp. They were like 80 bucks though so they are kind of pricey, but they are polyeurathane instead of the rubber ones. I think there are a few places to get them online at like 70 bucks. Here is the link to JCwhitney's

http://www.jcwhitney.com/product.jht...161857&BQ=jcw2