03 Screw 2wd with 3" Body Lift - Tire Questions

Thread Tools
 
Search this Thread
 
  #1  
Old 04-21-2004 | 05:00 PM
dallasscrew's Avatar
Thread Starter
|
Senior Member
Joined: Sep 2003
Posts: 279
Likes: 0
From: Boston
03 Screw 2wd with 3" Body Lift - Tire Questions

I also posted this below, but hate running over other poeple's thread, so i'll just start my own...


I'm guess you all have 4x4's, right?
my 03' Screw is a 2x4, ordered a 3" body lift and it is being installed next week.

i figure 33" tires will be no problem, stock were 30" - would just suck up the difference lift made.

my question is, will 35"s fit a 4x2 with just a 3" body lift? they seem to be cheaper and more common than a 33" these days. not as worried about a little rub at full lock, just getting into the fenders or valance.

Thanks
 
  #2  
Old 04-22-2004 | 08:08 AM
wandell's Avatar
Senior Member
Joined: Sep 2001
Posts: 28,203
Likes: 2
From: cairo,ga
Personally, I'd stick with a 33 inch tire with the body lift. I think that would be the best looking combo. If you really want 35's, I'd add at least a couple more inches of lift. Maybe 2 inch lift coils or 2 inch Daystar coil spring spacers.
 
  #3  
Old 04-22-2004 | 08:47 AM
dallasscrew's Avatar
Thread Starter
|
Senior Member
Joined: Sep 2003
Posts: 279
Likes: 0
From: Boston
Thanks for the info!
 



Quick Reply: 03 Screw 2wd with 3" Body Lift - Tire Questions



All times are GMT -4. The time now is 03:46 PM.