Leveling a 94' 4X4

Thread Tools
 
Search this Thread
 
  #1  
Old 01-02-2006 | 09:19 AM
stumper's Avatar
Thread Starter
|
Member
Joined: Dec 2005
Posts: 55
Likes: 0
From: NC
Leveling a 94' 4X4

Anyone leveled one of these older models? A couple questions - pros / cons of the 2" springs vs the 2" poly doughnuts?? Does this small amount of lift create allignment issues?
 
  #2  
Old 01-02-2006 | 10:01 AM
wandell's Avatar
Senior Member
Joined: Sep 2001
Posts: 28,203
Likes: 2
From: cairo,ga
I know I have seen leveling spacers advertised right next to alignment kits. As for springs vs spacers, I think it would depend on how much the OEM springs have sagged over the years. If you notice your truck sits lower than similar trucks, I'd get new springs. I wish I could help more.
 
  #3  
Old 01-02-2006 | 07:56 PM
stumper's Avatar
Thread Starter
|
Member
Joined: Dec 2005
Posts: 55
Likes: 0
From: NC
I don't know how much it has sagged over time but it was always considerably lower in the front anyway, even when new. From ground to fender opening top there is a good 2.5" difference front to back. I'd like to level it up some, although I'd actually prefer to have it a tad lower in the front ( a 1.5" lift would be just right). I did an online search and found both poly spacers and springs. There's actually very little difference in price between the two options. My primary question is if either option would throw off the allignment enough to require adjustment.
 
  #4  
Old 01-03-2006 | 08:09 AM
wandell's Avatar
Senior Member
Joined: Sep 2001
Posts: 28,203
Likes: 2
From: cairo,ga
You will have to get an alingnment with either.
 



Quick Reply: Leveling a 94' 4X4



All times are GMT -4. The time now is 04:20 PM.