Fabtech Lift w/ Pics!!!
#1
Fabtech Lift w/ Pics!!!
Hey guys...got the Fabtech lift installed today. Funny thing was that fabtech sent two shocks that were 4 inches too short of the back! So I ended up springing for some Tough Country CS9000's which were 45 a pair at the store (couldn't go home without something going wrong lol). Well here it is!
SOme photos are off by a bit (long story to that too) as I was driving back from best buy the person in front of me was tailgating this other dude...who took a sharp left hard breaking turn (no signal) the guy in front of me slammed on the brakes I had to slam and swerve into the second lane in order not to get hit, this was the closest to a collision I have ever been and was a little shaken up by it!
~Phil
SOme photos are off by a bit (long story to that too) as I was driving back from best buy the person in front of me was tailgating this other dude...who took a sharp left hard breaking turn (no signal) the guy in front of me slammed on the brakes I had to slam and swerve into the second lane in order not to get hit, this was the closest to a collision I have ever been and was a little shaken up by it!
~Phil
#7
Trending Topics
#14
Thanks some more guys on the compliments...bass...it does look lower in the front in that one picture (I can't figure it out) the back is level with the front of the truck in real life and if you look at the first picture...there is more clearance than is in the possible rubbing picture posted..the left doesn't rub at all (had it at a decent flex today no problems) but the right does a little...time to bust out the dremel!
~Phil
~Phil