does anyone know if I can sqeeze anymore inches out of my RCD 6" lift? I really want 37 when i buy new tires. my wheels now have 4.75" backspace, but the ones i will bet getting when i buy new tires have 5" backspacing. if i was to get the fabtech coilovers along with uniball UCAs and raise it up in the front about 1.5-2 inches over the 6". do you think they will fit? I dont want a bodylift in any shape form or fashion. heard and seen bad things when people do bodylifts and actully drive there truck offroad.

 

put some pics up.. im thinkin about gettin that lift.. how do yo like it?

 

good question is...are you 2WD or 4WD. if you are 4WD you will be fine with the coilovers cranked. If you are 2WD with coilovers cranked you may need to trim a little bit, but you should be fine with the 5"s of backspacing on the wheels. Go for it.

 

I have had it for about six months at the 6" possition along with adding pro comp trac bars and fabtech steering stabilizers i love it. and to answer the question im 4wd. do you think i will need the UCAs?

 

Can you post up a picture of your CV axles?

 

thump, their at the same angle that the stock CVs are at.

 

i seen a guy on here a while back with 37s on a 04-newer 150 and hey had a rancho kit with a couple other things up front to get more lift. who was that?, and how did they do that?

 

Believe you are talking about Sal.

https://www.f150online.com/galleries....cfm?gnum=5688

 

So get the coilovers and lift the rear more with a new leaf pack or add-a-leaf.

I wouldn't spend the money on the UCAs before getting a Deaver leaf pack or the like.

 

hey thump what is the size on that gators decal on the back window and where did you get it? UF club shop?

 

I'm not how big it is, it's the biggest size they sold at my store, I actually had to trim it to fit. It's a store in Daytona Beach that sells a LOT of Gator stuff. Pretty much all Gator stuff.