When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
so i was just wondering if i can fit 37 12.50s on a 4+3 setup without cranking the t bars anymore. i already have the t bars cranked about .5 inch. i dont mind doing some triming to the fenders.
i dont know what the backspacing is but they are the 17" xd series hoss and with 33x12.50 tires they stick out about 1 inch passed the front fenders. does anyone know what the backspacing is on those rims?
Note its not just the hight thats the problem its the front and back clearance especially when turning and moving over bumps rocks etc especially with a 13.5 width plan on some grinding (good excuse to get new tools):
hmmmm so will 36x13.50 iroks on the 4+3 set up work well without rubbing with no t-bar crank? i just though that 37s would fit good because alot of people are putting 35s on just 3" body lifts.
thanks