i have the procomp stage 1 6" lift and my truck sits 1.5" lower in rear, and i am going to install my bilsteins(on the front) next week. so it will be 3.5" lower then. i have the 2" factory block and the 2.5" block that came with procomp lift, (don't know why it came with that short of a block). gonna get a aal and a 5" block, but the rear will still be 1" lower. what else can i do? thanks for any help! - brandon

 

ttt

 

It will be even, trust me.

 

Definitely AAL, If not level Pro Comp makes a $30 shim kit that will fix the problem.

If Jditta says it will be level then trust what he says. If its not, its a cheap and easy fix so you are in the clear.

 

I coulndt find the shim kit anywhere.

 

thanks guys, and jditta is that what you used also, the 5" block and 2" aaal. thanks

 

4wp installed it on my truck. If you look on Pro Comp's website under the installs, its listed on there somewhere. Its just a few quarter inch plates that bolt on the same way the blocks do.

I know a few other people here that have one.

 

^^^^^^^^

thanks man!

 

The shim kit bolts dirrectly to the spring pack replacing the springs bolts ajustable from 1/4 to 1" I used 3 shims and a helper spring with a 3" block to raise mine now sits up 1/2" in back