How big are the axles on an F250? I only ask because...Check out the mounts for superduty rear traction bars.. I'm not holding my breath this would work, but it certainly looks to have potential with what I want to do.

http://www.rizeind.com/05news_photos...hp?id=67&pic=2
http://www.rizeind.com/05news_photos...hp?id=67&pic=6

 

Matt, you didnt answer my question , do you actually need the traction bars ?

a full leaf spring setup helps w/ axel wrap anyway

 

If you get a new leaf pack, are you gonna sell your old ones?

 

To my knowledge, no I don't I can't say I have ever experienced axle wrap with any of my setups. These are all just things I have wanted for a while, now they are things I want to make work together!

 

i can see that working as long as you get a hold of the superduty axles and just measure that out. Then would have to fab up something to the frame

 

As quick as I can get them off

 

How much you gonna want for them, Arent they a 6" leaf pack

 

I was thinking about trying to get a hold of just the rear axle connections from a superduty trac bar set (probably a chore in itself..). the trac bars for the F150 just use a new block type thing through the Ubolts on the bottom of the axle.

 

Thats up in the air still... They are a 4" leaf pack (according to deaver) but I got 6" of lift out of them..? I asked deaver about this when I had them on the phone and they couldn't explain it. I know they where installed correctly, I installed them! once they gave more than 4" of lift I tore it apart again and there is only one way to put them in there so I have no clue how they gave 6" of lift but they did

 

yah i can see it working but like you said getting the connection part for the superduty trac bar set is going to be a pain itself

 

what that sounds like is you ended up with a 6inch leaf pack and they messed up

 

Haha yeah I remember that thread with that good picture of your truck looking like the titanic... Let me a know a price if you get new ones, I would be able to run these with a 2" block.

 

did Matt ever get back to ya about that other 12" Rize? Both of you are going to have some big basterds with a 12+3 combo!

 

That is what I think too, I love the ride and flex the deavers have; but have had hell with that company. First trying to get these leaf packs took 2 months, now I want bigger and they won't build anything over 6".

IOR- I'll let ya know when the time comes. If you go that route I may have to buy those Rize blocks off ya

 

no he did not. I tried asking again in his other thread but he didnt answer so im prob gonna shoot a pm over too him about it. I know its gonna be crazy haha almost should just wait and save for an sas but oh well. The rize lifts are just beautiful too look at on trucks. Yeah it would be 12+3+2