Pic Request- 33's and 35's on OEM 20's
#1
01-15-2010, 02:39 AM
Join Date: Nov 2007
Location: Blue Springs, MO
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Pic Request- 33's and 35's on OEM 20's
I have searched and found some older shots of guys with 33's and 35's on the stock 20's but just wanted to see if anyone had any new shots of there ~07's with this set-up.
I am going to be dropping the cash for an AS 2" and either the 33's or 35's depending on whether or not I can pull the trigger or not. Thanks for the help everyone.
MH
I am going to be dropping the cash for an AS 2" and either the 33's or 35's depending on whether or not I can pull the trigger or not. Thanks for the help everyone.
MH
#2
01-15-2010, 07:21 AM
Senior Member
Join Date: Feb 2009
Location: Uxbridge, Ontario
Posts: 584
Likes: 0
Received 0 Likes
on
0 Posts
Here are some pic from my 09 with OEM 20s from an 07. I am running a 305-55-20 Mickey Thompson ATZ tire (33.4x12.5).
I do have minor rub at full lock turning left only, but rub on the sway bar, not the control arm or Ball joint.
I would suggest a 285 or 295 is you never want any rub, but I am not overly concerned about the rub I have.
Truck setup is a 2.5" Autospring level and a 1.5" Procomp (long) add-a-leaf
I do have minor rub at full lock turning left only, but rub on the sway bar, not the control arm or Ball joint.
I would suggest a 285 or 295 is you never want any rub, but I am not overly concerned about the rub I have.
Truck setup is a 2.5" Autospring level and a 1.5" Procomp (long) add-a-leaf
#4
01-15-2010, 10:14 AM
Senior Member
Join Date: Feb 2006
Location: Windsor, Ont.
Posts: 3,762
Likes: 0
Received 0 Likes
on
0 Posts
#6
02-22-2010, 07:54 PM
Join Date: Nov 2007
Location: Blue Springs, MO
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
#7
02-22-2010, 08:42 PM
Trending Topics
#8
02-22-2010, 10:29 PM
Senior Member
Join Date: Feb 2010
Location: TEXAS
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts