i have an all stock 2003 f150 supercrew 4x4 and was hoping somebody could tell me how to get it lifted and saggin in the back. i was planning on gettin 33s or 35 nitto mud grapplers on it, any suggestions ? anything would help

 

Sooooo, you want a lift but you want the back end to sag?? Am I reading that right? Buy a lift kit and only install the front end components...that'll accomplish that.

 

Duuuuuuuuuuuhuuhhhhhhh

 

dude im 15 how was i supposed to know that ? ha but alright thanks

 

dude, just buy the lift, and don't install all the leaf springs in the back or just crank up the front torsion bars after you lift it.... Don't leave the springs out, Im pretty sure that will look retarded... Im used to seeing prerunner-type trucks... that's ok looking, but I wouldn't lift the front 6" and the back none at all... IMHO

 

alright i might try that. i like how yours is sittin by the way

 

Don't get mud grapplers! just a waste of money IMO... Go with a toyo m/t.

 

CORRECTTTTTTTTTT

 

i see trucks like you describe back in my home town and i think it is the most awful looking thing ever

 

around here they call it "sittin cali"

 

Biggest pet peave ever. They look so stupid

 

yeah i think an inch maybe even two inches higher in the front is ok, but some of these trucks that i see around here that look like they have an 8" lift in the front and only a 2" block in the back look plain out rediculous!

 

Not this again,

But if you want to blind birds, then install lift and instead of using the block supplied, get a smaller one...

 

my truck currently has a 2.5'' bulldog stance, and its too much for me. i'm probably going to either add a 2'' block, or do a shackle flip in the rear.