I just got my truck lowered yesterday. Its an 06' Lincoln Mark LT 4WD. I used the DJM 3.5" control arms for the front. The rear is the Flip kit, lift hangers, shocks and removed the lift blocks for a 4" drop, all DJM. It should sit exactly like this truck (same exact set up and its also 4WD) http://djmsuspension.com/Articles%20...dF150Drop.html.

I havent put on the aftermarket rims yet (Saleen 23"s), they still have the factory 18"s. For some reason the front is about .5"-1" higher then the rear. I was expecting it to be the other way around. Why is this if I used the same exact set up on the same exact truck? I cant really see putting the bigger rims on making it any different, but i could be wrong.