I got a pair of fabtech 3 inch lift coils and upper arms. I have a 1999 4.2 V6 F150 that has stock suspension. Does anyone know if I can put those parts on it or do I need the 3 inch lift spindles too. And also what size of shocks would be the right ones to use.

 

You'll be fine with the coils and ucas but your gonna want shocks for around 3" lift max

 

Do you know if I will need to align it or buy anything to align it

 

You'll need an alignment and camber bolts that run about 50 and replace the UCA bolts. T

 

Ok i got some bolts with the oval shaped washers that bolt the uca to the frame. Those are the camber bolts right? So what are the other bolts that I need?

 

That's all you need then other than shocks and the alignment. O and probably new balljoints unless you got them with the uca's since I'm gonna guess and say they're used

 

ya theyre used i got the fabtech upper arms, 3 inch lift springs, and bolts for 125 off craigslist. now Im sure ill replace the ball joints but what if I didnt, what differance would it make and how much better would the new ones make it. I appreciate your help btw thanks

 

No not a bad deal but you will need to get new balljoints. It's just not worth the trouble to install everything then replace them a little bit down the road. Your looking at 50-100+ in ball joints and they use chevy balljoints btw invade you weren't told that

 

So i gotta get chevy balljoints for the f150 fabtech control arms? If i go to autozone to get them should I just ask for upper ball joints for a 99 silverado?

 

Yup it's a funny thing but if you say 99f150 they'll give you a stock uca.