5.4 V8 Misfiring AGAIN!

Thread Tools
 
Search this Thread
 
  #136  
Old 04-07-2011 | 12:22 PM
jbrew's Avatar
Technical Article Contributor
Joined: Oct 2005
Posts: 25,641
Likes: 15
From: MI
Well, I wish I new whether or not the throttle body is the same size, because that's what you really need and it might be worth purchasing just for that. What your looking at in that ebay pic is two main pieces. 1. the throttle body and 2. the throttle body elbow.

I'll email a few people that might know. - If you can wait. (?)
 
  #137  
Old 04-07-2011 | 12:24 PM
FF Titus's Avatar
Thread Starter
|
Senior Member
Joined: Dec 2010
Posts: 239
Likes: 0
From: Coventry RI
I can wait, and thank you for your time looking into this for me. It looks like I'm still going to need the correct EGR valve though. So I'll order that, but before doing so I'll post on here just to be sure. Let me know & Thank you again.
 
  #138  
Old 04-07-2011 | 12:25 PM
FF Titus's Avatar
Thread Starter
|
Senior Member
Joined: Dec 2010
Posts: 239
Likes: 0
From: Coventry RI
When I looked up the factory number 2L1U-CA

I find on google

http://webcache.googleusercontent.co...www.google.com

That link and it's showing it fits the 5.4 and 4.6
 
  #139  
Old 04-07-2011 | 12:31 PM
jbrew's Avatar
Technical Article Contributor
Joined: Oct 2005
Posts: 25,641
Likes: 15
From: MI
Yea, looks like it will. Just bolt it to your elbow. Now all you need is the EGR valve.
 
  #140  
Old 04-07-2011 | 12:39 PM
FF Titus's Avatar
Thread Starter
|
Senior Member
Joined: Dec 2010
Posts: 239
Likes: 0
From: Coventry RI
Well now I have some extra parts maybe I can help someone on here with if they need them.

Now to hunt down that valve, should I go with motorcraft? Normally I would just figured I'd ask.
 
  #141  
Old 04-07-2011 | 12:49 PM
glc's Avatar
glc
Senior Member
Joined: Dec 2006
Posts: 43,310
Likes: 777
From: Joplin MO
2000 Expy 5.4?

Rockauto.com -

OEM Motorcraft EGR valve is $94.99. Aftermarkets are $33.79 to $66.79. Some come with gaskets, some don't. Gaskets are $1.97 to $5.92.

They don't list a throttle body.

What you could do is check with tascaparts.com, they go by VIN there. They are probably the cheapest source for OEM and they are a forum sponsor. Tasca is a large Ford dealer in Cranston, looks like you could just take a run over there.
 
  #142  
Old 04-07-2011 | 12:57 PM
FF Titus's Avatar
Thread Starter
|
Senior Member
Joined: Dec 2010
Posts: 239
Likes: 0
From: Coventry RI
Tasca, yep right down the street. $94.24 on the EGR, much better than the mechanics $200 price tag. I would rather buy motorcraft at this point.

The ebay seller is sticking by his word that that is for a 5.4. I'm obviously taking your guys word for it, you've never steered me wrong.
 
  #143  
Old 04-07-2011 | 01:03 PM
jbrew's Avatar
Technical Article Contributor
Joined: Oct 2005
Posts: 25,641
Likes: 15
From: MI
Yea, your TB separates from the elbow, I know I have a pic of mine somewhere, - yea here -

 
  #144  
Old 04-07-2011 | 01:19 PM
jbrew's Avatar
Technical Article Contributor
Joined: Oct 2005
Posts: 25,641
Likes: 15
From: MI
Originally Posted by FF Titus
Tasca, yep right down the street. $94.24 on the EGR, much better than the mechanics $200 price tag. I would rather buy motorcraft at this point.

The ebay seller is sticking by his word that that is for a 5.4. I'm obviously taking your guys word for it, you've never steered me wrong.
You have a 2000 Expy ? Some of those Expy's & Navigators are different. An easy way to tell, just in case, do this, - see where your IAC is located. All 5four locations are usually at the very back of the throttle body elbow. If yours is along side the elbow, (which I doubt, but I could be wrong) then I would have to agree with the seller. The 5.4L IAC is usually located here -



Confirm were yours is mounted.
 
  #145  
Old 04-07-2011 | 01:26 PM
FF Titus's Avatar
Thread Starter
|
Senior Member
Joined: Dec 2010
Posts: 239
Likes: 0
From: Coventry RI
Yes I have a 2000 expy. I don't have any photos at this time clearly showing it.
 
  #146  
Old 04-07-2011 | 01:30 PM
jbrew's Avatar
Technical Article Contributor
Joined: Oct 2005
Posts: 25,641
Likes: 15
From: MI
Here's another pic lol -

 
  #147  
Old 04-07-2011 | 01:32 PM
jbrew's Avatar
Technical Article Contributor
Joined: Oct 2005
Posts: 25,641
Likes: 15
From: MI
Originally Posted by FF Titus
Yes I have a 2000 expy. I don't have any photos at this time clearly showing it.
Yea just a quick look under the hood and you'll know. The IAC will either be in front of back. Ebay pic shows front, my pics show back.
 
  #148  
Old 04-07-2011 | 01:33 PM
FF Titus's Avatar
Thread Starter
|
Senior Member
Joined: Dec 2010
Posts: 239
Likes: 0
From: Coventry RI
I remember it now looking like that and with me flipping it off.
 
  #149  
Old 04-07-2011 | 01:35 PM
jbrew's Avatar
Technical Article Contributor
Joined: Oct 2005
Posts: 25,641
Likes: 15
From: MI
EGR differences, =

1. Blue capped is 4six.
2. Red capped is 5four.

 
  #150  
Old 04-07-2011 | 01:37 PM
jbrew's Avatar
Technical Article Contributor
Joined: Oct 2005
Posts: 25,641
Likes: 15
From: MI
Originally Posted by FF Titus
I remember it now looking like that and with me flipping it off.
Yea, I tried to edit that lol.
 


Quick Reply: 5.4 V8 Misfiring AGAIN!



All times are GMT -4. The time now is 04:27 PM.