New CROSS-DRILLED / SLOTTED ROTORS installed.
#1
#4
The combination of drilled/slotted rotors AND pro-ceramic pads have greatly improved my braking. The new rotors/pads with 22's stop better than the stock rotors/pads with stock wheels & tires. As for the cost, I bought the new rotors at R1 Concepts (an ebay store) for $215.00 (all 4 rotors ! ) shipped to my door w/ free zinc plating. They also have BLACK and GOLD plating for the rotors, but keep in mind the coating is for rust prevention on the rotor and will wear off where the pads grab! The Pro-Ceramic pads are from www.Schucks.com (a local auto parts store) at $128.00 for front & rear pads. You can buy cheep organic pads for around $25 a set or semi-metallic pads for $40 a set, but since I've had these Ceramic pads for the last week, I would never buy anything else. Well worth the $$$ and they are low dust/improved braking/longer lasting.
Here's the link to the R1 Concepts store:
http://stores.ebay.com/R1-Concepts_W...toreviewQQtZkm
Here's the link to the R1 Concepts store:
http://stores.ebay.com/R1-Concepts_W...toreviewQQtZkm
Last edited by rockafella; 08-19-2005 at 11:45 AM.
#5
#6
#7
Trending Topics
#8
I have no idea if they make rear disc conversion kits, but then again I've never looked for them. I would try BAER os POWERSLOT to see if they make one. If you can't find one and want to upgrade the rear brakes, have the drums turned or replace them and use CERAMIC or KEVLAR PADS. You can buy front DRILLED / SLOTTED rotors and upgrade the pads ALL THE WAY AROUND and this will improve your over all stopping power. With new or freshly turned drums along with new Kevlar or Ceramic pads in the rear, you might find that you don't need rear disc's. Hope this helped a little. Good luck.
#11
i would watch those rotors tho. you did buy a good brand so should be no problems. but when heat builds up they tend to crack the cheaper ones. keep an eye on them for a while. and for whoever asked about a conversion kit from drum to disk yes they make one yes u will pay big time for it! if you can look for a junked truck with all the stuff already on it. TONS cheaper just remember when and if u find one... clean everything up nice. turn rotors if they need it and grease everything in the caliper. good luck for the find!
#12
The stock brakes were only about 20% when I installed the new 22's. And as we all know, larger rolling mass = more stress on the brakes. My wife took my truck over the mountains and reduced both inner front pads to metal on metal, which of course destroyed both front rotors. Oh, darn, have to upgrade to drilled/slotted. I did some research and at $68 a rotor from the FORD dealer, it was cheaper to go with the new ones from R1 Concepts. I did make sure to pair up the new rotors with a complete set of PRO CERAMIC pads to help slow the 22's. So far, about 500 miles on them now, no complaints what so ever! and I am always checking the rotors for any signs of cracking when ever I wash it, about 3 times a week. Thanks for all the input guys!
#13
Originally Posted by rockafella
The stock brakes were only about 20% when I installed the new 22's. And as we all know, larger rolling mass = more stress on the brakes. My wife took my truck over the mountains and reduced both inner front pads to metal on metal, which of course destroyed both front rotors. Oh, darn, have to upgrade to drilled/slotted. I did some research and at $68 a rotor from the FORD dealer, it was cheaper to go with the new ones from R1 Concepts. I did make sure to pair up the new rotors with a complete set of PRO CERAMIC pads to help slow the 22's. So far, about 500 miles on them now, no complaints what so ever! and I am always checking the rotors for any signs of cracking when ever I wash it, about 3 times a week. Thanks for all the input guys!
#14
Originally Posted by dreamsr
Rockafella is it possible to replace the drums (1997 Lariat 4WD) with disc brakes?
How much would that cost?
Are there any better brake drum kits availble other than stock?
How much would that cost?
Are there any better brake drum kits availble other than stock?
not worth the investment especially since rear drums are only used 30%.. i hae stock pads on my truck and its been through 127,00 miles about 70% of those miles were spent towing a trailor... and the rear shoes are at 65% and dont need replacing... so unless u do alotta burn outs and power brake or ride around loaded down alot u dont need to upgrade ur rear brakes.
#15
Hey Faster - I have always heard that the fronts do twice the work of the backs too - and I can't remember replacing backs much.
Gotta admit that rear discs do look cooler with spoke wheels.
Has any one tried the stainless replacement lines? 2 in front & one in back.
My brakes are just o.k. I think I'll do rockafella's thing, and lines for improvement.
Gotta admit that rear discs do look cooler with spoke wheels.
Has any one tried the stainless replacement lines? 2 in front & one in back.
My brakes are just o.k. I think I'll do rockafella's thing, and lines for improvement.