Rotor Specifications for Warpage

Thread Tools
 
Search this Thread
 
  #1  
Old 09-01-2006 | 09:37 AM
thompsdw's Avatar
Thread Starter
|
Member
Joined: Aug 2003
Posts: 70
Likes: 0
Rotor Specifications for Warpage

Does anyone know what the flatness specificantion is for Ford rotors? I want to check all 4 of mine to identify which one is the problem????
 
  #2  
Old 09-02-2006 | 05:09 PM
Colorado Osprey's Avatar
Senior Member
Joined: May 2005
Posts: 1,461
Likes: 0
From: Colorado
I don't know about what the spec is for run-out,(book is at work) but most people can feel a warped rotor on the front when it is larger than 0.030" That's only 0.015" if measuring from one side, meaning at least 0.030" will need to be cut to straighten them out.
 
  #3  
Old 09-02-2006 | 05:33 PM
jbrew's Avatar
Technical Article Contributor
Joined: Oct 2005
Posts: 25,641
Likes: 15
From: MI
If you end up replacing them I just recieved mine, I ordered over the Internet from autopartswarehouse.com - Brembo's for my 98 . Big diffrerence so far, they can take heat . Free shipping when I ordered.

Good Luck!!
 
  #4  
Old 09-03-2006 | 10:22 PM
jbrew's Avatar
Technical Article Contributor
Joined: Oct 2005
Posts: 25,641
Likes: 15
From: MI
Heres a spec sheet I dug up , you might have to zoom in on it ..

Hope it helps

https://www.f150online.com/galleries...260&anum=10939
 




All times are GMT -4. The time now is 06:21 AM.