ok i want to put a 20x10 inch wheel under my 06 f150 s/c. i want the tire that goes on it to fill the fender well nicely and NO RUBBING. i like the white s/c with the moto wheels and the 305/50/20 tires but he says he is having some rubbing issues even after the leveling kit was installed. i dont mind lifting the truck if i need to but i do not want 70 percent of my tires hanging out the fender well an inch would be exceptable but thats it.

AS A DISCLAIMER IM SURE THIS HAS BEEN POSTED SOMEWHERE PREVIOUSLY BUT IM NEW AND NOT WELL VERSED WITH THIS STUFF JUST YET

 

Do you have a 4x4 or 4x2? Either way, a 305/50-20 should fit easily unless the wheel has a really weird backspacing. What wheels are you considering?

 

I think the problem is the 20x10 wheel and the backspacing the guy in the white truck used. The tire size wasn't the issue, he just used too little backspacing on that 10" wide wheel, so it sticks out farther and has more chance to rub at full lock.

 

If you DONT want the tires to stick out much go with a narrower wheel like 20x8 or 20x9 and that will help w the rubbin issue.

 

You are new and ignorant, we got some that have been around a long time and are still ignorant. Welcome!

 

 

Like I Said I Aint Too Hip To These Forums Just Yet..... Its A 4x4, I Wanna Put Those Moto Metal 951 On There. I Love That Truck A Few Posts Up Aboue Here Its Lifted Perfect. Im Just Not Sure I Can Afford It. Trook How Much Do You Have In Your Lift And Wheels And Tires...