ABS Light
#16
#18
#19
well the shop i took my truck too today i passed emissions with no problem. State inspection they wanted $867 to replace front pads that had seperated (factory defect in the pads i guess), both front rotors that need turned, and serpentine belt being cracked . I told them they were out of there mind and i'll take the truck back into my own hands and fix things. They mentioned nothing about my ABS light being on so i guess it does not matter for PA inspection.
Last edited by kickstand5; 04-23-2007 at 07:58 PM.
#20
Originally Posted by jbrew
Bleed em/ Flush it , yuh have air in the valve or some kind of foreign matter- it happens...
Good Luck
Good Luck
I think it has to do with older resivoir lids dont hold pressure like they should be.
#21
Alright went to the ford place and let them put it on the computer. The abs module is out along with the pump. They told me the pump is burnt up, but i ran a hot wire to it and it came on. Are they just trying to screw me on buying a pump? They posted on here the moudule can be rebuilt. Can it and by who? What would a rebuild cost? The ford place wants to charge me $1200 dollars to fix it.
#23
Get this i found a wrecked 02 F-150 and picked up the module for $35 bucks put it on and everything is fine now. The ford place said the pump was burned up along with a whole lot af B.S.. The Ford Place wanted to charge me $1200 dollars to do what cost me $35 dollars to do. Grant you the part is not new but come on for that price who cares. Just goes to show you how they screw people who don't know any better.