Close to Buying Last Question
#1
Close to Buying Last Question
This is my last question before i buy but i just want to make sure. Is it possible to get 305-70-17 with a 2 inch leveling kit and this would be on the stock rims. I think these tires roughly come out to 33.9 inches. I would get the Nitto grapplers. I don't know if i have enough backspacing or if the tire will rub. I definitely do not want the tire rubbing. If someone could help me out i would greatly appreciate it. Thanks
2004 Fx4 scab
2004 Fx4 scab
#7
Trending Topics
#11
#15
Okay, sorry, it's late & I'm a little slow...So just to be clear, I have a 2007 4x4 SCrew w/a 2.5" leveling kit.
1.Will I have any problems if I install a 305/70/17 (32.8"x12"x17")?
2. Is it correct that my rim size must be 9inches or less?
3. Does my backspacing matter, and if it does is 5.5" of backspacing okay?
4. Is it better for the fitment for the backspacing to be higher or lower?
5. Will I have to do any front valance trimming w/this set up?
Thank you guys SOOOO much. Wheels & tires are so foreign to me and I am just trying to read, learn, and soak up as much info abou them as possible & I have learned so much on this board.
Thanks again Guys...you all rock!!
1.Will I have any problems if I install a 305/70/17 (32.8"x12"x17")?
2. Is it correct that my rim size must be 9inches or less?
3. Does my backspacing matter, and if it does is 5.5" of backspacing okay?
4. Is it better for the fitment for the backspacing to be higher or lower?
5. Will I have to do any front valance trimming w/this set up?
Thank you guys SOOOO much. Wheels & tires are so foreign to me and I am just trying to read, learn, and soak up as much info abou them as possible & I have learned so much on this board.
Thanks again Guys...you all rock!!