Hey guys, my trucks a 2wd 02 Screw that i'm installing a 1.5" coil spacers and a 3" body lift.

I'm looking at going with nitto terra's 305/70/16 on a 16x10 wheel. will this set-up work with the way i'm lifting the truck? i dont mind trimming the front bumper a little if they will rub while turning. i just want to go with a size that will look right for the truck.

thanks guys

 

Yes,they will fit with some trimming on the valance.

 

thanks wandell

getting the body lift and spacers next week and the wheels and tires should be after the holidays

 

While the front end is partially torn down, I'd suggest installing a set of adjustable camber bolts. Some trucks need them to get the aligment correct after installing lift coils or spacers and they are only about $40 at most parts stores.

 

sweet, appreciate that. i'll definitly do that.