new wheels and 35s..tell me what you think
#31
#33
combo looks good...what all did you have to trim to get those to fit? Have you taken it off-road?
__________________
I had to trim the valance very little but had to do a good bit of trimming to the back of the wheel well. I pulled the plastic off and cut the edge of the fender off maybe a inch and then put the plastic back over it and heated it up and formed it to fit. I haven't taken it off-road and to be very honest with ya it don't go off-road much other than going across some farming fields and pastures which are flat for the most part. I went with that big aggressive look just for the looks not performance or anything else, call me crazy i dont care
but if your planning on putting 35s on you will DEFINETLY need a lift kit unless you wanna baby it like i do. I have a 89 f150 4x4 with a 8" lift that i get stupid in
__________________
I had to trim the valance very little but had to do a good bit of trimming to the back of the wheel well. I pulled the plastic off and cut the edge of the fender off maybe a inch and then put the plastic back over it and heated it up and formed it to fit. I haven't taken it off-road and to be very honest with ya it don't go off-road much other than going across some farming fields and pastures which are flat for the most part. I went with that big aggressive look just for the looks not performance or anything else, call me crazy i dont care
![lol](https://www.f150online.com/forums/images/smilies/lol.gif)
![Smilie](https://www.f150online.com/forums/images/smilies/smile.gif)
#34