Just as the title says, looking to see if anyone is actually able to run (trouble free) a 325-60-R20 AT without rubbing.

Have a set on a 20x9 rim with -12 offset and 4.5" bs.

 

No, you will need more lift to fit 325/60-20's (35x13.00), especially if it's a 4x2. You should be able to fit 305/55-20's (33x12.50) using that wheel if you have a 4x4.

 

Seems there is a few people based on the responses I got on my thread. I think it depends on the tire brand too. The size of the side lugs.

 

Though they are running 18mm offset and 5.71 BS that might make the difference.

 

Dont think with the 4.5 bs is gona work. They will hit the outer lower fender..wheel sticking to far out. Blackout FX4 and I are running 2.5as and 22x9.5 him with 18 offset and me with 30mm offset and each have slight rub. Thu we are running 325/50/22 grapplers...the are just under 35, but the 325/60/20 are a tru 35 or slight over. That will cause more of an issue. Guy here in town as that tire on think 20x8 rim, but has 3as level kit with no issue.

 

ok guys i appreciate the response. I had my answer a few days ago but was looking for some more response.

Looks like i will be selling the tires locally and getting a smaller 35. 35x12.5 Mickey Thompson ATZ... might even just go with the 33. I have yet to see where this is talking me. Thanks again.