Rotors and Brakes Replacement
#1
Rotors and Brakes Replacement
I am looking to replacing my brake rotors and pads soon. I was told to stay away from the drilled and slotted since my truck isn't used for racing or heavy towing. I do however tow a 21 ft. boat occasionally. What would be a good rotor, and what would be a good ceramic brake pad to buy?
Thanks for the input!
Derik
Thanks for the input!
Derik
#2
I am looking to replacing my brake rotors and pads soon. I was told to stay away from the drilled and slotted since my truck isn't used for racing or heavy towing. I do however tow a 21 ft. boat occasionally. What would be a good rotor, and what would be a good ceramic brake pad to buy?
Thanks for the input!
Derik
Thanks for the input!
Derik
Slotted rotors keep dust and heat away from the system that could cause gas hydroplaning under heavy braking. So, they are beneficial. You don't have to have a sports car to benefit from slotted rotors. Drilled rotors could crack between the holes if not careful. PowerSlot Rotors and Hawk LTS pads seem to be the favorite.
Call me, let me see what we have that best suite your needs.
#3
I have the PS Cryos up front and the regular PS rotors in the rear with all Hawk LTS pads all around. It has been a great setup! Much improved from the OEM setup..
As far as towing your boat I don't know how heavy it is, but if it is over 2,000 lbs you may want to look into a brake controller and trailer brakes. That will help you stop much safer than upgrading your truck's brakes.
As far as towing your boat I don't know how heavy it is, but if it is over 2,000 lbs you may want to look into a brake controller and trailer brakes. That will help you stop much safer than upgrading your truck's brakes.
#6
I have the PS Cryos up front and the regular PS rotors in the rear with all Hawk LTS pads all around. It has been a great setup! Much improved from the OEM setup..
As far as towing your boat I don't know how heavy it is, but if it is over 2,000 lbs you may want to look into a brake controller and trailer brakes. That will help you stop much safer than upgrading your truck's brakes.
As far as towing your boat I don't know how heavy it is, but if it is over 2,000 lbs you may want to look into a brake controller and trailer brakes. That will help you stop much safer than upgrading your truck's brakes.
The stopping power and pedal feel is great, and there is NO DUST... ZERO
#7
I just ordered a set of the regular PowerSlot rotors for the fronts and rears, along with the Hawk LTS pads from AutoAnything.com. They sent me an e-mail with a code for 12% anything, today only.
Rotors ended up costing $101 each and the pads ran $63/pair, tax and free shipping included. All in all, not too bad.
Now I just need to find time to install them once they get here.
- NCSU
Rotors ended up costing $101 each and the pads ran $63/pair, tax and free shipping included. All in all, not too bad.
Now I just need to find time to install them once they get here.
- NCSU
Last edited by NCSU_05_FX4; 05-12-2009 at 02:50 PM.
Trending Topics
#8
Check around or watch for a special to get the best price.
You won't be dissapointed once you finish this setup...
#9
#10
#12
Stock rotors are fine. You should consider having them turned, and keeping them. If the pads look bad, just get a good set and put them on at the same time.
Most guys around here like to get carried away (which is fine) and spend more than is needed.
#13
#14
Did my brakes last weekend.... Stoptech drilled / slotted and EBC Greenstuff pads (low dust)... also put in some SS brake lines. Awesome feel. Drilled was mostly for looks, slotted is definitely beneficial especially for towing. (And yes, "cheap" drilled rotors will crack... not all rotors are drilled equally.)
#15
ford will true the rotors under warranty my f250 had that problem they would'nt replace em but the resurfaced em covered by warranty