i see they make um' for 97-03 f150, what about 04-08, i realize lugs are different, i want my wheels a sticking out a little more in the front end

 

yes they make them but i have no clue made mine, i bought them at a local offroad shop to fit my stock wheels with a 6in lift, they were around $200 for 1in spacers

 

go on ebay i just saw some the other day on their for the 6x135mm bolt pattern i think they were 1.5" spaers

 

I just bought mine from ezaccessories.com I looked on ebay and couldn't find them. They have the 6x135 to 6x135 for stock or you can go 6x135 to whatever aftermarket pattern. I got the 1.5in and paid 200 after shipping.

 

The shop that does the work on my truck has a guy they have make them for him. I went with 2" spacers.
[IMG][/IMG]

 

i just picked up 2 inch wheel spacers for my truck i got all 4 for 60$ the guy i bought them from paid about 300 for them, i made out good time wheni get a chance i'll take a few pics

 

anyone running wheel spacers encounter any problems yet ? (04-08)

debating putting 1/1.5" spacers on with my 7005's in the winter, bc they have so much backspacing.

 

Nope had them on for a whole week now put about 300 miles on my truck and i didnt even have to tighted them down after driveing that far, just torqe them down to a 150Lbs each lug nut to a 150 and you should be fine, if i get a chance i'll post some pics

 

None here either. I've had two inch spacers for over a year now and no issues other than they make my tires rub a little when off roading. I found some one inch on eBay thinking that would be the ticket and the oem studs were too long for them to mount flush. The inch and halfs must be okay since a few guys have them.

 

No problems (Knock on wood), mine have been on for a few months

 

1" wheel adapters all around

 

bulldawgfan141, to mount one inch adapters did you have to replace your OEM studs with shorter ones so they mount flush ? If so how big of job is it to switch them out ?

 

would u have to cut the stock studs with a 1.5 inch adapter ? i wanna run them with my set up

 

You will be fine with 1.5", anything smaller you will have to modify the oem studs/

 

Reviving this thread to find out if you guys used HUB centric spacers or LUG centric spacers? Looking to buy some 1.5 or 2" for my 05 Lariat. Thanks in advance for the input !!