i have a stock 02 4x4 and looking to put some 325/60-18 dura grapps on mamba M4's 18X9 with 5 3/8 backspacing and 10+mm offset

now im planning on leveling my truck with the stock keys but im wondering if they will fit?

i also plan on trimming plastic for sure

thanks in advance

 

That's a lot of backspacing for a 97-03 truck. I'd want 4.5 or 5 inches max. That size will fit using a 9 to 10 inch wide wheel with 4.5 inches of BS and some trimming.

 

ya i would go with less but mamba has only that rim in that backspace so just trim it up and level it and theyll fit ?

 

I'm worried about rubbing on the frame and control arms at full steering lock because of the deep backspacing.

 

true they make a 275-70-18 in the dura grapp but i think it will be to narrow they recommend a 8.5 rmax rim width

 

325/60/18 Nittos on 18x9's with 4 1/2" backspace. Leveled and trimmed front valance.










You could always get the 20x10's. Mamba has the M4 20x10 with 4-1/2" backspacing.

 

so basicallly i need less backspace to fit them. savage any rubbing issues that wandell stated

 

that black screw is so sick, its my 2nd favorite truck on this site (right behind mine :-) )

 

Nope, no rubbing.