35's w/ 6" lift - rubbing issues?
#16
With all the talk about the valance needing to be cut, I went and checked mine. I never noticed that the previous owner had the valance cut. It looks like they just used a utility knife to me.
While I was at it, I took a pic of the rear where it rubs on the inside of the fender.
Strangely, I have rub marks on the outside of my coil overs as well. I've turned the wheel every which way and I can't figure out where it came from. It seems as if it is old and not an ongoing rub but I am not sure. Thoughts?
While I was at it, I took a pic of the rear where it rubs on the inside of the fender.
Strangely, I have rub marks on the outside of my coil overs as well. I've turned the wheel every which way and I can't figure out where it came from. It seems as if it is old and not an ongoing rub but I am not sure. Thoughts?
#17
#20
#21
Just went out and checked the UCA's. No rub marks at all on them. The odd thing is that if the rubbing was ongoing you would think it would look worse than it is. Perhaps they scratched up the coils during install. Just to make sure I got some gloss Hi-Temp spray paint, spayed it into the cap, and dabbed each scratch repeatedly with a brush and paint. Now the marks are gone and I will let it sit overnight. Tomorrow I will take it out and put it through its paces to see if the rub marks come back.