I see mixed reviews on this tire size and was contemplating going with a set of Cooper Zeons on 22" Harley black spoke rims.

My truck is stock height with no levelling kits or anything. Will I have ANY turning or rubbing issues??

 

U will be fine. I had that size on my old 04 gmc that was 2wd. U could even fit 305/45/22 without a level. Wandell has the 305/45/22 on his stock height expedition. The 40 series may look a little small in the wheelwells.

 

I've got a 2010 AWD Harley with the 305-40-22 Cooper Zeon LTZ's on the factory 22's and have had no problems.

Got pics in my album.

 

Man, I'm nervous. I already ordered these wheels/tire size on recommendation of the tire shop. Is there any difference in offset on a 2010 F150 in comparison to an 07'-08'? They are just on their way to me now.

The guy told me....." these are 22x9 with a 44mm offset, so the back spacing is 6.73". we have run 305 45 22 on 22x9.5 with a 40mm offset (6.83" back space) so they should fit. "

Am I going to be ok?

 

There's NO offset difference

The 2008 HD wheels were reused in white on the 2011 limited f150

 

Yeah, you should be fine.

 

The wheels are Harley knockoffs. I believe they have a different offset. Stock Harley's were 22x9 with 30mm offset. These wheel are 22x9 with 44 mm offset.

Hopefully they still fit?

 

Link if you have one?

some of the members here have used the 23" saleen wheel with the 30mm or 44mm offset on all four......

 

Hmmm...can't provide you with a link except the ebay one. The wheels are manufactured by topline products....same company that has been producing wheel locks/adapter for decades. Here is a link: http://cgi.ebay.com/ebaymotors/22-FO...item35b54ae7e3

The wheels are distributed by BJ Chrome and Customs. I spoke with him directly on numerous occasions in regards to quality and fitment. He assured me the quality was equal or better than OEM and that he does not sell anything he wouldn't install on his own personal vehicle. He sent me pictures of the exact wheels as well as tires. He also told me he would warranty them for 3 years. He's sold many sets and none have come back. I"m not the least bit concerned on the quality of the wheels.......just the fitment of the tires with that offset.

 

I have never seen someone so worried about tire fitment on a stock wheel and street tire size on a 4x4 truck...

On a side note...that price suddenly changed my opinion on the HD wheels

 

If you think the 44 mm offset is going to be a fitment issue.....it isn't......its more of the preferred offset over the 30 mm.......that's what I remember from when wanted to buy Saleen wheels......if it is a problem you can get a 14 mm wheel spacer....

 

You'd be worried too if the price was around $2600 by the time you put rubber on them, tps sensors, lugnuts and shipping only to find out they don't fit?

Maybe I am being too cautious.....just looking for reassurance.

 

Do you think my wheels and tires were free?

 

If they were, please tell me where you got them from.....thems are nice too. 8)

Don't mean to sound like a broken record.

 

Thanks, and thanks for not taking that wrong. I might have came off a little aggressive on that comment, but wasn't my intention.

Too bad my wheels are discontinued. That 150,000 miles on them has been tough on them and would love to get a new set of them.