Fitment Issue - KMC and Nitto

Thread Tools
 
Search this Thread
 
  #1  
Old 11-18-2011, 08:53 AM
pylda's Avatar
Senior Member
Thread Starter
Join Date: Jan 2005
Location: Grand Prairie, Texas
Posts: 703
Likes: 0
Received 0 Likes on 0 Posts
Fitment Issue - KMC and Nitto

Looking put to new wheels and tires on the truck in January. I want the KMC Brodie and a set of 305/55/20 Nitto Trail Grapplers. I have a 2008 with a 2" level in the front and 2" blocks in the back. It is a 2wd. If I get the +15 offset wheels, will I have any clearance issues? I am getting a discount through a buddy at Discount Tire.

Thanks in advance.
 
  #2  
Old 11-18-2011, 02:17 PM
wandell's Avatar
Senior Member
Join Date: Sep 2001
Location: cairo,ga
Posts: 28,203
Likes: 0
Received 2 Likes on 2 Posts
I'd go with a 9 inch wide wheel with 5 inches of BS or slightly more.
 
  #3  
Old 11-18-2011, 06:27 PM
pylda's Avatar
Senior Member
Thread Starter
Join Date: Jan 2005
Location: Grand Prairie, Texas
Posts: 703
Likes: 0
Received 0 Likes on 0 Posts
The wheel I am looking at appears to be a 20x9 with +15 offset and 5.59 back spacing. So you are telling me that this should work?

http://www.tirepackage.com/Wheels/KM...PKM67129063515
 
  #4  
Old 11-18-2011, 07:58 PM
jerrybizzle's Avatar
Senior Member
Join Date: Dec 2010
Location: boise, id
Posts: 1,129
Likes: 0
Received 0 Likes on 0 Posts
Should work just fine and will look even better. If any rubbing it would be minor. Maybe trim the plastic piece on the valance is all.
 
  #5  
Old 11-18-2011, 08:21 PM
atr04screw's Avatar
Senior Member
Join Date: Dec 2010
Location: Harlem, GA
Posts: 849
Likes: 0
Received 0 Likes on 0 Posts
That shouldn't rub any. Make sure you put some pics up when you get them on
 
  #6  
Old 11-19-2011, 03:25 PM
wandell's Avatar
Senior Member
Join Date: Sep 2001
Location: cairo,ga
Posts: 28,203
Likes: 0
Received 2 Likes on 2 Posts
I agree.
 



Quick Reply: Fitment Issue - KMC and Nitto



All times are GMT -4. The time now is 09:49 PM.