Will they fit question?

Thread Tools
 
Search this Thread
 
  #1  
Old 03-24-2012, 04:21 PM
dkgreyf150's Avatar
Senior Member
Thread Starter
Join Date: Jul 2008
Location: arkansas
Posts: 682
Likes: 0
Received 0 Likes on 0 Posts
Will they fit question?

Haven't been around in a while but it's time for new tires so I figured I would go ahead and put new rims and tires. My setup right now is 8 inch lift with 37x13.5r17 Toyo mts. My rims are 17x9 with a -30 offset and I believe a 4.53 backspacing. I want to go with a 37x13.50R22 Toyo mts or trail grapplers but here is where I'm a little confused if they would fit. The rims I want to go with are either fuel hostage 22x11 with a -18 or xd monster in the same size. Any input will be greatly appreciated!
 
  #2  
Old 03-26-2012, 01:06 PM
dkgreyf150's Avatar
Senior Member
Thread Starter
Join Date: Jul 2008
Location: arkansas
Posts: 682
Likes: 0
Received 0 Likes on 0 Posts
Come on guys! I know this forum is better than that.
 
  #3  
Old 03-27-2012, 12:19 PM
wandell's Avatar
Senior Member
Join Date: Sep 2001
Location: cairo,ga
Posts: 28,203
Likes: 0
Received 2 Likes on 2 Posts
What's the backspacing on the new wheels?
 
  #4  
Old 03-27-2012, 02:51 PM
canadianelbow's Avatar
Senior Member
Join Date: Mar 2010
Location: Calgary, Alberta
Posts: 1,526
Likes: 0
Received 1 Like on 1 Post
From the spec page http://mhtwheels.com/pdf/specs/D530-...20Hostage1.pdf I dont see a 22X11 with -18.

Could you link to the spec page so we are all on the same page as to which wheels you are talking about, and the specs....
 
  #5  
Old 03-29-2012, 09:30 PM
dkgreyf150's Avatar
Senior Member
Thread Starter
Join Date: Jul 2008
Location: arkansas
Posts: 682
Likes: 0
Received 0 Likes on 0 Posts
I figured out they actually don't make that size. I'm still looking for a rim that I like and has the right specs.
 
  #6  
Old 03-29-2012, 09:35 PM
dkgreyf150's Avatar
Senior Member
Thread Starter
Join Date: Jul 2008
Location: arkansas
Posts: 682
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by wandell
What's the backspacing on the new wheels?
Idk yet! Any recommendations?
 
  #7  
Old 03-30-2012, 12:47 PM
wandell's Avatar
Senior Member
Join Date: Sep 2001
Location: cairo,ga
Posts: 28,203
Likes: 0
Received 2 Likes on 2 Posts
I'd stick with a wheel with close your current wheel specs. Like 5 inches of BS and 9 to 10 inches wide. I wouldn't go 11 inches wide.
 
  #8  
Old 03-30-2012, 01:14 PM
MossyOak3006's Avatar
Senior Member
Join Date: Mar 2011
Location: Auburn, AL
Posts: 1,365
Likes: 0
Received 0 Likes on 0 Posts
If I was you, I would get 20" rims instead of 22". They're cheaper and you can get most rims in any specs you want. There are a lot more choices
 
  #9  
Old 03-30-2012, 02:55 PM
dkgreyf150's Avatar
Senior Member
Thread Starter
Join Date: Jul 2008
Location: arkansas
Posts: 682
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by wandell
I'd stick with a wheel with close your current wheel specs. Like 5 inches of BS and 9 to 10 inches wide. I wouldn't go 11 inches wide.
Ok thanks for the help.. I'll probably just end up going with 20x10 as bad as I don't want to
 



Quick Reply: Will they fit question?



All times are GMT -4. The time now is 04:55 AM.